Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
128
Noise Cancellation Select
DESCRIPTION:
This command selects/reports the setting of the Noise Cancellation for each microphone channel.
RETURN VALUES:
Unit will return the updated state of the last selection in the same form as the command.
TEXT FORM DETAILS
COMMAND FORM: [DEVICE] NCSEL <Channel> <Value>
Where:
DEVICE: See General Text command form Description
NCSEL Text Command
Channel See M in Groups and Channels
Value
0 Enable Noise Cancellation
1 Disable Noise Cancellation
2 Toggle Noise Cancellation
Null Return the current mode
RETURN VALUES
Unit will return the updated state of the last selection in the same form as the command.
If Command returns
Noise cancellation on channel 1 is enabled <DEVICE> NCSEL 1 1
Non-Linear Processing Adjust
DESCRIPTION:
This command selects/reports the setting of the Non-linear processing for each microphone channel.
RETURN VALUES:
Unit will return the updated state of the last selection in the same form as the command.
TEXT FORM DETAILS
COMMAND FORM: [DEVICE] NLP <Channel> <Value>
Where:
DEVICE: See General Text command form Description
NLP Text Command
Channel See M in Groups and Channels
Value
0 select Non-linear processing to OFF
1 select Non-linear processing to Soft
2 select Non-linear processing to Medium
3 select Non-linear processing to Aggressive
Null return the current mode
RETURN VALUES
Unit will return the updated state of the last selection in the same form as the command.
If Command returns
Non linear processing on channel 1 is set to soft <DEVICE> NLP 1 1