Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
130
PA Adaptive Mode
DESCRIPTION:
This command selects/reports PA adaptive mode for the specified mixer. There can be only one selection per mixer.
RETURN VALUES:
Unit always returns the last executed PA adaptive selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> PAA <Channel> [Value]
Where:
<DEVICE>: See General Text command form Description
PAA Text Command
Channel See Mic in Groups and Channels (Table 1, page 95)
Value
0 select PA adaptive mode to be disabled
1 select PA adaptive mode to be enabled
2 select PA adaptive mode to toggle
Null return the current mode
RETURN VALUES
The command will return the updated condition of the PA adaptive mode in the same format as the command.
If Command Returns
PA adaptive is enabled for Mic 1 DEVICE PAA 1 1
PA adaptive is disabled for Mic 1 DEVICE PAA 1 0
PA Reference Select
DESCRIPTION:
This command selects/reports which output is used for each mic as a reference for power amp adaptation mode.
There can be only one selection per mixer.
RETURN VALUES:
Unit always returns the last executed REFSEL selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> REFSEL < Reference Channel > < Reference Group > [Channel]
Where:
<DEVICE>: See General Text command form Description
REFSEL Text Command
Channel See Mic in Groups and Channels (Table 1, page 95)
Reference Group ‘O’, ‘E’. See Groups and Channels (Table 1, page 95)
Reference Channel O: see Groups and Channels (Table 1, page 95)
E: see Expansion Bus Reference channels in Groups and Channels (Table 1,
page 95)
RETURN VALUES
The command will return the updated condition of the REFSEL mode in the same format as the command.
If Command Returns
REFSEL is set for output channel 1 for Mic 1 DEVICE REFSEL 1 O 1