Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
132
Program String
DESCRIPTION:
This command sets/reports a programmed string.
RETURN VALUES:
Unit always returns the specified program string in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> PRGSTRING <ID> [String]
Where:
DEVICE: See General Text command form Description
PRGSTRING Text Command
ID string identifier 0 - 7
String
String =1-80 characters Parameter to select string characters to be sent when the execute string
command is issued
String=CLEAR Parameter to clear the current string
String=Null Parameter to report the current string
RETURN VALUES
The command will return the specified program string
If Command Returns
Program string #3 is MUTE DEVICE PRGSTRING 3 MUTE
Serial Echo
DESCRIPTION:
This command selects/reports the serial echo of the RS-232 port.
RETURN VALUES:
Unit will return the updated state of the last selection in the same form as the command.
TEXT FORM DETAILS
COMMAND FORM: DEVICE SERECHO [Value]
Where:
DEVICE: See General Text command form Description
SERECHO Text Command
Value
0 Select serial echo to off
1 Select serial echo to on
2 Toggle the serial echo
Null Return current serial echo
RETURN VALUES
Unit will return the updated state of the last selection in the same form as the command.
If Command Returns
Serial echo is to be set to echo all ports DEVICE SERECHO 1