Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
INDEX
147
A
acoustic echo canceller (AEC) 39
adaptive reference 27
adding a XAP 800 unit to a site 23
baud rate 13, 22, 100
default meter 14, 23, 105
device ID 8, 9, 11, 12, 23, 90
flow control 13, 22, 115
modem password 22, 24, 126
serial echo 24
serial mode 24, 133
unit type 23
Use Modem box 22, 24
AGC 38, 46, 58
AMX 22, 85, 93
attack 50, 51
B
bypass 54
C
C Button 32
change file password 22
change preset label 59, 77, 78
command strings 27
compression 51, 54, 101
Connect Menu 28
control panel 61
Control Panel Builder 61
Control/Status A Port 84
Control/Status B Port 85
Copy Menu 29
cross point 2, 35, 58, 75, 76, 121
Cross Point Attenuation Dial 35
Cross Point configuration 35
Cross Point Menu 35, 58
D
data light 34
default meter. See adding a XAP 800 unit to a site
Define PA Adapt Expansion Bus Reference 27, 43,
44
delay 53
device ID. See adding a XAP 800 unit to a site
E
error codes 93
Expansion Bus 2, 6, 8, 9, 31, 35, 43, 58, 75
Expansion Bus labels 48, 56
From Expansion Bus 48
O-R Buses 6
S-Z Buses 6
To Expansion Bus 56
F
File Menu 26
firmware version 11
G
G-Ware software
advanced operation 57
configuration 20
creating floppy disk copies 17
G-Ware Matrix 34
installation procedure 18
Macro Mode 62
new site creation. See adding a XAP 800 unit to
a site
pre-installation information 17
Preset Mode 57
gain 38, 41
gate ratio 43, 113
Gate View 65
Gating Controls 27, 30, 76, 78
gating parameters 42
adaptive ambient 43
ambient level 43
auto gate 42
chairman override 42
decay rate 43
gate ratio 43
hold time 43
off attenuation 43
PA adaptive mode 43
PA adaptive reference 43
global mixer group 7
Index