Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
G-WARE SOFTWARE • PULL-DOWN MENUS
27
In 9-12 displays the Inputs 9-12 window. This window can also be opened
with the In 9-12 button on the matrix. See page 47 for more information
about these inputs.
Outputs 1-12 displays the Outputs 1-12 window. This window can also be
opened with the Outputs 1-12 button on the matrix. See page 55 for more
information about the outputs.
Processing opens the Processing window. This window can also be
opened with the From Processing button on the matrix. See page 49 for
more information about From Processing.
Gating Control opens the Gating Controls window. It can be opened with
the Gating Controls toolbar button. See page 44 for more information.
Macro Edit opens the Macro Editor window. This window can also be
opened with the Macro Editor button on the toolbar. See page 64 for more
information about the Macro Editor.
GPIO Builder opens the GPIO Builder window. This window can also be
opened with the GPIO Builder toolbar button. See page 60 for more
information about the GPIO Builder.
Panel Builder opens the Control Panel Builder window. This window can
be opened with the Control Panel Builder toolbar button. See page 61 for
more information about the Control Panel Builder.
Command Strings opens the Command Strings window, where you enter
command strings through the RS-232 port to execute functions such as
increasing volume.
Telco, Telco Config, and Telco Meters are for use with the XAP TH2
Telephone Interface. See the XAP TH2 Installation and Operation Manual
and the G-Ware help file for more information.
PA Adapt/AEC Expansion Bus Ref opens the Define PA Adapt/AEC
Expansion Bus Ref window. This window can also be opened from within
the PA Adaptive and AEC Reference section of the software. See page 43
for more information.
Units Menu
Add opens the Unit Properties—New Unit window so you can add a
XAP 800 unit to a site. See page 23 for more information about adding a
XAP 800 unit to a site.
Remove Unit removes a XAP 800 unit from a site.
View Menu
Units Menu