Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
G-WARE SOFTWARE • TOOLBAR BUTTONS
31
Define Expansion Bus Ref Button
Command Strings Button
Command Strings Button
The Command Strings button opens the Command String window,
where you enter command strings through the RS-232 port to execute
functions such as increasing volume.
Telco Button
The Telco button opens the telco window, where you dial calls through
an attached XAP TH2 Telephone Interface. See the G-Ware help file or
XAP TH2 Installation and Operation Manual for more information.
Telco Configuration Button
This opens the Telco Configuration window, where you set operation
parameters for a connected XAP TH2 Telephone Interface. See the
G-Ware help file or XAP TH2 Installation and Operation Manual for more
information.
Execute a Preset Button
The Execute a Preset button opens the Execute Preset window, where
you select the saved preset you wish to run. Then click Execute to run
the preset.
Run a Macro Button
The Run a Macro button opens the Run Macro window. Here, you
select which macro you wish to run. Then click Run to initiate the
macro. See the Macro Mode section on page 62 for information about
creating macros.
Define Expansion Bus Ref Button
The Define Expansion Bus Ref button opens the Define PA
Adapt/AEC Expansion Bus Reference window. This window allows you
to set the PA adaptive and acoustic echo cancellation reference for a
particular Expansion Bus. This window also becomes accessible when
configuring specific parameters in the PA Adaptive Reference section
of the Gate configuration window. See page 44 for more information.
Run a Macro Button
Execute a Preset Button
Telco Button
Telco Configuration Button