Specifications

Mute mutes the input channel. The light on the button illuminates red
when Mute is activated. Default is Off (unmuted).
AGC/SL opens the Automatic Gain Control/Speech Leveler
window.
The Speech Leveler is a compander that is optimized for
speech audio. It quickly equalizes the difference in speech
levels in the room without bringing up noise.
AGC adjusts softer and louder input audio to a consistent level
that you select (the target level). The target level range is from
-30 to 20dB in 1dB steps. the default target level is +4dB.
Set the target level first, then apply the amount of maximum
gain that you want the AGC to apply to the signal. Maximum
gain range is 0 to 18dB in 1dB steps. The default value is
18dB. AGC occurs after the gain and filter settings in the
audio signal path.
The Active Gain meter reflects the overall gain at any given
moment. Click the white box next to the meter to enable it.
The Response Time adjustment determines the total AGC
engage/disengage response time. The Threshold determines
the decibel level at which you wish the AGC to engage.
Setting the threshold toward the higher end of the scale (near
0) reduces background noise to a greater degree. Both the Response
Time and Threshold are RMS.
The Speech Leveler and AGC defaults are Off.
P Pwr (Phantom Power) toggles the phantom power on and off.
Phantom power is an auxiliary power source to power certain types of
microphones. The XAP 800’s phantom power voltage is 24VDC. Default
is On.
TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
G-WARE SOFTWARE • AUTOMATIC GAIN CONTROL/SPEECH LEVELER
38
AGC/Speech Leveler Window
Input 1-8 Labels Window
Move the cursor to the blue Input 1 label and click. This opens
the Input 1-8 Labels window. Proceed to name each input. When
you are finished configuring these inputs, click OK.
All meters in G-Ware are
peak meters. The target
level and threshold controls
in the AGC/SL window reflect RMS
values.
✍