Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
G-WARE SOFTWARE • FILTERS
40
Inputs 1-8 Filters
Four configurable filters are provided on each input. by default, they are not enabled
and the filter types are not defined.
To configure the filters for Inputs 1-8, click Filter. The Filter Graph setup window
appears. Below is a description of each feature in the window.
Active Filter selects among filters on the graph. Note that no filters exist until you
click Add Filter (see below) to add filters to the graph.
Type selects among the following input filters: all pass, high pass, low pass, notch,
and PEQ. G-Ware features other filters, but they are configured in the Processing
section of the software (see page 49).
All-pass filter: Frequency range is 20Hz to 20kHz with resolution to 1Hz or four places
(whichever is larger).
High-pass filter: Selectable frequency cutoff is 20Hz to 20kHz, in 1Hz increments.
Rolloff is 12dB/octave. Level is fixed at 0dB.
Low-pass filter: Selectable frequency cutoff is 20Hz to 20kHz in 1Hz increments.
Rolloff is 12dB/octave. Level is fixed at 0dB.
Notch filter: Center frequency range is 20Hz to 20kHz with resolution to 1Hz or four
places (whichever is larger). Bandwidth is from .05 to 5 octaves in .01 octave
increments. Level is fixed at -80dB.
PEQ (parametric equalizer: Center frequency range is 20Hz to 20kHz with resolution
to 1Hz or 4 places (whichever is larger). Bandwidth is .05 to 5 octaves in .01 octave
Inputs 1-8 Filters
Window