Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
G-WARE SOFTWARE • INPUTS 9-12
47
Inputs 9-12 Configuration
Configure Inputs 9-12 by clicking In 9-12 in the G-Ware Configuration
matrix window.
These four line-level non-gated inputs are electronically balanced. They
can be mixed in any combination with the gated inputs to any of the 12
outputs through the matrix. The nominal input level is 0dBu.
G-Ware Configuration Matrix Window, In 9-12
Button
Input 9-12 Configuration Window
Select the input you wish to modify, then configure each parameter. These
controls operate the same as those for Inputs 1-8, including the procedure for
labeling each input. However, note that there are no phantom power, filter,
gate, or coarse gain controls. Also, there are no gated or non-gated meters.
The AGC button opens the AGC window. Note that there is no speech leveler
function. See page 38 for more information about AGC.
Adjusting the input gain levels for these inputs is the same as for the Inputs 1-8
fine gain adjustments (page 45). Notice the yellow and green upper and lower
limit arrows on the Gain slider scale. Adjust these to establish minimum and
maximum gain limits for the input. The limits you set affect the relative gain
commands you establish for the input. See Gain Structure on page 46 for
information about how to set the input gain.
The Pre-Gain and Post-Gain meters work the same as those for Inputs 1-8. See
page 46 for information about these meters.