Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
G-WARE SOFTWARE • OUTPUTS 1-12
55
Outputs 1-12 Configuration
At the G-Ware Configuration matrix window, click Outputs 1-12. This
opens the Outputs 1-12 configuration window.
The XAP 800 uses 12 balanced line-level outputs. The nominal output
level is 0dBm. They can operate at nominal levels ranging from -20 to
+4dBm. The outputs can adjust for line imbalances and maintain a
constant output level.
Outputs 1-12
Configuration
Window
G-Ware Configuration Matrix Window,
Outputs 1-12 Button
Select Output 1. Enable Mute if you wish to mute this output. Default is Off.
NOM (constant gain) maintains a constant gain level as inputs routed to the
output are gated on and off. The XAP 800 reduces the output level for mics
based on the number of mics gated on and routed to that output. When using
NOM over the Expansion Bus, only the first four audio channels (O, P, Q and R)
support passing NOM information.
Enable NOM if you wish to place this output in a constant gain mode. Default is
On.
Gain establishes the gain level for this output. Select a level between -65 and
20dB. If you select any level below -60dB, the signal will be muted.
The Level Meter, when enabled, shows the signal level when a signal is present.