Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760

ADVANCED OPERATION • DOCUMENT COMPARE UTILITY

3. In the Open window, select files to compare

through the G-Ware Files tab or select connected

units or sites through the G-Ware Connections tab.

4. When you have made a selection, click Refresh

to update the status of the unit, site, or connection.

Then click Open.

5. Repeat this process with the Site 2 Find File

button to select the second unit, site, or document

for comparison.

6. When you make your selection and click Open in the Site 2 Open

window, G-Ware automatically compares information from the selected

items and displays a table of parameters which differ (note that the

actual differences are not displayed at this point). This process can take

a minute or two.

7. To view the difference(s) between two

sources on a single parameter, select the line

in the table you wish to examine, then click

Preview. This opens the Print Preview

window, which shows what the differences

are.

8. To print the report, click Print (you can

also click Print in the Compare Utility

window to print the report). The other buttons

in this window allow you to tailor the view of

the report and browse sequentially through

each page.

When you finish viewing or printing the

report, close the Print Preview window.

Print Preview Window

Open Window