Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760

APPENDIX D • ACCESSORIES

Appendix D:

Accessories

Accessory Gentner Part Number

Tabletop Omni Microphone 910-103-160 (with cable)

Tabletop Uni Microphone 910-103-161 (with cable)

Button Omni Microphone 910-103-162 (black button)/910-103-163 (white button)

Button Uni Microphone 910-103-164 (black button)/910-103-165 (white button)

Delta Microphone 910-103-340

Acc. Kit, Side Trim 860-150-002

Wall Mount Speaker 910-103-010

Select Control Panel 910-155-050

Volume Control Panel 910-155-051

Appendix E: Serial

Port Commands

The XAP 800 accepts serial commands through the serial port. The

commands are then channeled along the Expansion Bus network to all

interconnected XAP 800 units. The following commands pertain only to

the XAP 800.

RS-232 serial port protocol is 9,600, 19,200, 38,400 (default), or 57,600

baud; 8 bits, 1 stop bit, no parity.

Conventions

This definition uses the following typographic conventions used in this

document:

Convention

Description

<X> Parameters enclosed in < > indicate and mandatory

parameter.

[X] Parameters enclosed in [ ] indicate and optional

parameter.

1-8 Parameters separated by a - indicate a range between the

values.

4,7,9 Parameters separated by a , indicate a list of available

values.

MREF Words in uppercase bold indicate command text.

DEVICE Indicates the device type and device number on the

Expansion Bus network. It is composed of a device type

character and a device number. The device type for the

XAP 800 is always 5 and the device number will always be

0 - 7.