Installation

6. Fold up the larger of the two panel systems
and “walk” it to the front center of the drum kit
or whatever you’re isolating.
7. With one person on each side, unfold the
system and wrap it around the kit.
8. Use your fingers to lift the panels at the bottom cable cut-outs to pull or push system
into final position. End panels should be parallel and symmetrical on either side of the
kit, about 7 feet apart for most applications.
9. Wrap the smaller panel system around
the back so it meets with front panels on
both sides.
10. Next, use extra base channel included
with your MegaPac to connect the front
panels with the rear panels on the side
opposite the door. Line up the end panels
of both shields, and attach the base chan-
nel to the top of the AX extenders.