User's Manual
7
Pairing the Neckloop and Bluetooth Phone
Place the Neckloop and phone close to each other, within
1-meter.
Make sure that the phone is on, and the Neckloop is off.
Prepare the Neckloop in pairing mode: press and hold
MFB (6 seconds) until the Red and Blue indicators flash
alternately.
Neckloop stays in pairing mode for about 2
minutes.
Prepare the phone in pairing mode: refer to phone s user
guide for detail. Pairing procedure may subject to different
makes and models.
Enter the Bluetooth menu on the phone and enables the
Bluetooth function. Enter the submenu to set the phone in
search for Bluetooth devices; activates the search. The
phone searches for Bluetooth devices within 10 meters
range and list all devices on its display. should
appear; else repeat pairing procedure.
Select
Enter the passcode 0000 and enter OK to paired the
Neckloop and phone.
When pairing completes, the Neckloop Blue indicator
flashes (4 times) rapidly; then connects with the phone.
If both devices fail to pair or are not paired within the time
limit (2 minutes), after a long low beep, the Neckloop goes
to standby state. Return to pairing procedure if necessary.
Important!
’
“”
“ ” from the list.
“” “”
Quattro
Quattro
1.
2.
3.
4.
5.
6.
12
Do not expose the Neckloop to fire; may result in
explosion.
Do not expose or store the Neckloop in high heat. High
temperature may shorten the life of electronic
components, damage battery, deform plastic parts.
Do not use harsh cleaning solvents or strong detergents
to clean the Neckloop. Only use a soft damp cloth to
clean the Neckloop.
Do not throw, drop or knock the Neckloop. Rough
handling can damage the Neckloop.
Do keep the Neckloop in proper storage, dry place, free
from dust and extreme temperatures when not in use.
6. Troubleshooting
If the Neckloop is unable to operate properly; for
example unable to power on, unable to pair/connect to
the phone and etc, please try the following:
Ensure the battery is properly charged, fully drained
battery may take a while to charge up.
Ensure the Neckloop and the phone is turned on.
Ensure the Neckloop is paired to the phone; refer to
pairing procedure.
Ensure the Bluetooth feature on the phone is activated,
and the phone is connected to the Neckloop.