User`s manual

ManualsBrandsClearSounds ManualsComputer equipmentBTS001

BTS001

Stereo Bluetooth Speaker

User’s manual

 Brief introduction………………………………………………..…..1

1. Bluetooth wireless communication technology………………….…...1

2. About BTS001…………………………………………………….….1

 Before use………………………………………………………...…..2

1. Overview…………………………………………………………...…2

 Basic operation………………………………………………..….….2

1. Turning on/off BTS001…………………………………………….…2

2. Pairing BTS001 with Bluetooth devices………………….…….….…3

3. Music playback…………………………………………………....….4

4. Making calls with BTS001……………………………...………..…..6

5. The operation of BTS001………………………………………….…6

6. LED indicator…………………………….……………………….….8

 Care and maintenance……………………………….……….…….8

 FAQs……………………………………………………..…….…….8

 Specifications…………………………………………….…….……9

Summary of content (11 pages)

PAGE 1
BTS001 Stereo Bluetooth Speaker User’s manual 1. 2. 1. 1. 2. 3. 4. 5. 6. Brief introduction………………………………………………..…..1 Bluetooth wireless communication technology………………….…...1 About BTS001…………………………………………………….….1 Before use………………………………………………………...…..2 Overview…………………………………………………………...…2 Basic operation………………………………………………..….….2 Turning on/off BTS001…………………………………………….…2 Pairing BTS001 with Bluetooth devices………………….…….….…3 Music playback…………………………………………………....….4 Making calls with BTS001…………………………….
PAGE 2
Welcome to this stereo Bluetooth speaker, BTS001. Please read this user’s manual carefully before use. Brief introduction 1. Bluetooth wireless communication technology Bluetooth is a standard of close range radio-communication technology that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology, we can achieve the highest transmission rate among cell phones, computers, printers, PDAs and other devices.
PAGE 3
Before use 1. Overview Basic operation 1. Turning on/off BTS001 Function Turn on BTS001 Turn off BTS001 LED indicator Blue LED flashes slowly Red LED is on and then off Operation Press and hold button for 3-5 seconds Press and hold button for 2-3 seconds Indication tone A string of tones A string of tones Remark: Every time the BTS001 is turned on, it will connect to the last connected device automatically.
PAGE 4
2. Pairing the BTS001 with Bluetooth devices How to enter pairing mode Function Status of BTS001 Operation Just turned off Press and hold button for Enter 3-5 seconds pairing Turned on and not Short press mode button connected to a Bluetooth device LED indicator Red and blue LEDs flash alternately Red and blue LEDs flash alternately Remarks: Pairing mode will last 5 minutes, the BTS001 will turn off automatically if no device can be connected after 5 minutes.
PAGE 5
After pairing is successful, BTS001 and your cell phone will remember each other, there is no need to re-pair at next use. Every time the BTS001 is turned on, it will connect to the last connected device automatically. If you want to pair it with other devices, please turn off the Bluetooth function of the last connected devices first and then try re-pairing with the new device according to steps 1～6 mentioned above.
PAGE 6
3) Pair and connect the BTS001 with the Bluetooth cell phone (refer to “Pairing BTS001 with a Bluetooth cell phone”); 4) Restart the Bluetooth transmitter, it will connect to the BTS001 automatically. Remarks: After multi-pairing is successful, the paired devices will remember each other, and there is no need to re-pair at next use. For a cell phone that supports HSP and A2DP, it may establish HSP and A2DP connection with BTS001 simultaneously.
PAGE 7
If you plug in a music player to the input socket of the BTS001 while it connects with a Bluetooth device, the Bluetooth device will disconnect from the BTS001. When you unplug the 3.5mm audio cable, the BTS001 will connect to the last Bluetooth device. 4. Making calls with the BTS001 When your cell phone is Bluetooth-enabled and set up with a HFP connection with the BTS001, you can make calls and remotely control calls using the BTS001. 1) Pair your cell phone with the BTS001.
PAGE 8
Answer call Reject call Incoming ring Incoming ring Short press button Press and hold button for about 2 seconds Short press button twice Microphone mute During a call Cancel mute During a call (microphone mute) Short press twice button End call During a call Short press button Three-way calling Reject a new incoming call and continue current call End current call and answer a new incoming call Keep current call and answer a new incoming call Switch between two calls End current call and answ
PAGE 9
6. LED indicator LED indicator Red and blue LEDs flashes alternately Blue LED flashes once every 2 seconds Red LED is on Blue LED flashes quickly Status of BTS001 Pairing mode Standby mode and connected to a Bluetooth device/during a call Music is transmitted to BTS001 by using the input socket Incoming call/calling Care and maintenance Read the following recommendations before using the BTS001. Following these you will be able to enjoy our product for many years.
PAGE 10
b) Ensure the BTS001 is in the effective working range; c) Make sure the pairing password entered is “0000’ and ensure the responding password of your Bluetooth transmitter also supports “0000”. 2. Why can’t the BTS001 play music when it connects to a Bluetooth cell phone? a) Make sure your Bluetooth cell phone supports A2DP profile; b) Ensure your Bluetooth cell phone is in effective working range. 3.
PAGE 11
Notes: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.