ENGLISH ESpAñoL FRANÇAIS CSC48 Operating Manual ANS3000 Digital Amplified Answering Machine with SlowV508 Speech 1 – ENGLISH
TABLE OF CONTENTS PRIOR TO USE Pg. 3............. Congratulations Pg. 3............. Important Safety Instructions Pg. 5............. Location of Controls INSTALLATION Pg. Pg. Pg. Pg. 7............. Parts checklist 7............. Connecting Lines 8............. Optional Battery 8............. Bracket Installation SETTINGS Pg. Pg. Pg. Pg. Pg. Pg. Pg. Pg. Pg. Pg. Pg. Pg. 9............. Power ON/OFF 9............. Voice Prompt Language 9............. Day Setting 10........... Time Setting 10...........
PRIOR TO USE Congratulations on your purchase of the ANS3000 Digital Amplified Answering Machine from ClearSounds Communications®. Please read this User Manual carefully in order to get the best use out of your new product. Keep this manual for easy reference. Please visit our website at www.clearsounds.com to register your product, download additional manuals and review trouble-shooting tips. Be sure to save your sales receipt as your proof of purchase should you need warranty service.
attempt to retrieve it until after you have unplugged the line cord from the modular wall jack. Do not plug the unit back in until it has dried completely. WARNING: Avoid using the telephone during electrical storms. There may be a remote risk of electric shock from lightning. If the electrical storm is present in your immediate area, possibility of electrical shock exists. WARNING: Do not use the phone if you suspect a gas leak in the area.
PLEASE SAVE THESE INSTRUCTIONS █ LOCATION OF CONTROLS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.
1 2 1. Wall Mounting Sockets 2. Battery Compartment 3. Bracket 3 INSTALLATION Installation of your ClearSounds® ANS3000 Amplified Answering Machine is easy. If at any time you have questions about your answering machine after reading this manual, please contact our ClearSounds® Customer Service Department at 1-800-965-9043.
█ PARTS CHECKLIST Check the contents of the box - The ANS3000 should contain: 1. 2. 3. 4. 5. Answering Machine AC Power Adapter Bracket Telephone line cord User’s Manual █ CONNECTING LINES Answering Machine Telephone AC Wall Outlet Wall Phone Jack 1. Connect one end of the telephone cord to the LINE jack on the back of the ANS3000 and connect the other end to a modular phone jack. 2. Optional: Connect your telephone to the TEL jack on the back of the ANS3000.
█ OPTIONAL BATTERY The ANS3000 utilizes non-volatile flash memory to store data such as the language selection, ringer number, playback speed, outgoing messages and recorded messages. This data will not be lost if the ANS3000 loses power. However, the Day setting is not stored and will need to be reset when power is restored.
the mounting screws so they are hooked into the left and right keyhole slots. Slowly slide the unit down until it snaps into place. SETTINGS █ Power ON/OFF In idle mode, press the On/Off key to turn the answering machine on or off. The current setting will be announced. If the answering machine is off, the LED shows “- -“. █ Voice Prompt Language There are 3 languages used to play the voice prompt messages: English, Spanish and French. To set the language: 1.
█ Time Setting If you subscribe to Caller ID service with your telephone service provider, the correct time is automatically set when you receive a call. You can also set the time manually. To Manually Set the Hour: 1. Press and hold the Hour key until a tone occurs. 2. Press the VOL+ or VOL- key until the correct time appears on the LED. 3. Press the Hour key to confirm the setting. To Manually Set the Minutes: 1. Press and hold the Minute key until a tone occurs. 2.
3. When the desired number of rings is displayed, press and hold the Ringer key and you will hear a confirmation beep. █ Outgoing Message (OGM) You can record 2 different outgoing messages (OGM). For example, you can record one message for business hours and another for non-business hours. Each OGM can be up to 3 minutes. The answering machine comes with a pre-recorded message for each OGM: the default message is “Hello, your call cannot be taken at the moment.
█ Managing Messages When you have new messages, these messages will always playback before saved messages. Once you have listened to any new messages, they become saved messages unless you delete them during playback. To Play New/Saved Messages: Press the Play/Stop key to play messages. Press the Repeat key once to replay the current message. Press it twice to play the previous message or press the Skip key to play the next one. To Delete Messages: 1.
█ Volume Control When playing the OGM or messages, press the Vol+ or Volkey to increase or decrease the voice volume. The LED will show the corresponding volume level (8 levels). █ Speed Control There are 3 levels of message playback speed and you can adjust the playback speed to your needs. To set the speed: 1. Press and hold the Speed key until the current setting is displayed. 2. Press the Speed key repeatedly to adjust the speed.
3. After you enter the PIN, the system will play the menu of commands. You can then follow the commands to operate. 1 - Main Menu 2 - Play New Messages 3 - Play All Messages 5 - Turn Machine On/Off 6 - Record Outgoing Message 0 - Delete All Messages While listening to messages, you can press 1 to replay the current message, 2 to stop the current message, and 0 to delete the current message. If you record a new outgoing message, press the  or  to finish.
TECHNICAL SPECIFICATIONS General Number: ANS3000 Power Requirements: AC power Adapter Input: 100~240V 50/60Hz 150mA Output: 9.0VDC 300mA Features and Specifications subject to change without notice. To learn more, call ClearSounds at 1-800-965-9043 or visit www.clearsounds.com FCC WANTS YOU TO KNOW 1. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
5. Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or repair any parts of device except as specified. 6. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. 7.
does not imply that Industry Canada approved the equipment. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connections. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
LIMITED ONE-YEAR WARRANTY The product is warranted by ClearSounds against manufacturing defect in material and workmanship under normal use for one (1) year from the date of purchase. Should you experience a problem, contact our customer service department or visit our website at www.clearsounds.com. Be sure to save your sale receipt as proof of purchase date should you need warranty service. Your ANS3000 Answering Machine comes with a (1) year limited warranty from the date of purchase.
shipping the product to us. Any shipment without a (RMA) Return Merchandise Authorization number will not be accepted and will be returned to you at your expense. All authorized returned products must be accompanied with proof of purchase and a brief explanation of the problem. For out of warranty repairs and service, please contact our Customer Service Department for directions. The repair shall be warranted for 90 days.
