User`s guide

14
Setup
3. Run through the opening on ,
and push excess cord behind the plate.
4. Attach to the phone:
a.Line up the keyholes on back of the phone
with the raised mounting pins on .
b.Pull toward the phone.
c.Slide upward until it is securely seated.
5. Connect to on the wall.
6. Slide over the phone jack wall plate.
To simply hang the phone on the wall
This method requires two self-tapping screws (included).
1. Locate a wall location within six feet of a telephone jack
wall plate and within nine feet of an AC power outlet.
2. Install the screws on the wall in a vertical line, at
a distance of 3.15 inches from each other.
3. Line up the keyholes on back of the phone over
the screws, and slide the phone downward until
it is securely seated.
4. Connect to on the back of the
phone base, and then connect it to in the wall.