Technical information

- 51 -
Advanced settings
1. Display the menu with MENU.
2. Select Sound with
/ and press OK to access.
3. Select one of the following items with
/ and press OK to access.
MPX / Digital Audio Preference / SPDIF Selection / HDMI Input
4. Set with
/ and press OK to store.
MPX
Selects multiplex sound mode (if available).
Stereo:
Use this normally.
Mono:
When stereo signal cannot be received
M1 / M2:
Available while mono signal is transmitted
●
For Analogue TV
When you receive the stereo / bilingual sound system, sound output modes
can be selected by using the MPX in the Sound Menu.
●
Meanings of mode indicators
: STEREO
: MAIN I
: SUB II
: MONO
■ Available mode indicator for each type of broadcast
●
NICAM - Used in New Zealand, Singapore, Hong Kong, etc.
– Regular broadcast (Standard Audio): No indicator /
– Regular + NICAM MONO I (MAIN I): /
– NICAM STEREO: /
– NICAM DUAL MONO (MAIN I / SUB II): / /
●
A2 (German) - Used in Australia, Malaysia, etc.
– Regular broadcast (Standard Audio): No Indicator /
– BILINGUAL or DUAL MONO (MAIN I / SUB II): /
– STEREO: /