Owner`s manual
48
49
Equalizers
ULTRAGRAPH DIGITAL DEQ1024
Ultra high-resolution processor for all EQ, RTA and t
dynamic applications, especially for PA and
audiophile mastering
Unique True Curve Function—what you see on the t
faders is what you get as frequency response
Revolutionary FBQ detection system instantly t
reveals critical frequencies and can also be used as
Audio Analyzer
Automatic and ultra-fast Feedback Destroyer plus t
feedback indication via fader LEDs
“Inaudible” Noise Gate/Peak Limiter function plus t
amazing Stereo Imager for spatial enhancement
Additional sweepable high and low cut lters for t
removal of unwanted frequencies like oor rumble and
high-frequency noise
Integrated Pink Noise generator for perfect room and t
loudspeaker equalization
Digital AES/EBU and S/PDIF interface and selectable t
sample rates (44.1, 48, 96 kHz)
Ultra high-resolution 24-bit/96 kHz A/D- and D/A t
converters and high-performance 24/48-bit Motorola
DSP for ultimate sonic resolution
Relay-controlled hard-bypass with an auto-bypass t
function during power failure (failsafe relay)
Highly accurate, 2 x 12-digit LED meters for easy input t
and output level setting
Servo-balanced inputs and outputs on gold-plated XLR t
and ¼" TRS connectors
Internal switch-mode power supply for maximum t
exibility (100 - 240 V~), noise-free audio,
superior transient response and lowest possible
power consumption
Nightclubs, concert halls, churches
and other live music environments
benefit greatly from the use of
equalizers for reducing feedback
and taming frequency anomalies
that would otherwise ruin a
performance. High-frequency
sounds tend to bounce off hard
surfaces and get absorbed by
others. Bass response can be
mushy, or become overwhelmingly
harsh. The critical midrange
zone, where the vocals and
solo instruments live can get
completely lost in the mix. A high
quality graphic EQ can help
solve these and a host of other
acoustic problems.
ULTRA-CURVE PRO DEQ2496
Ultra-high resolution processor for all EQ, RTA t
and dynamic applications, especially for PA and
audiophile mastering
4 concurrently selectable EQ modules (31-band graphic t
EQ, 10-band parametric EQ, Feedback Destroyer plus
3 Dynamic EQs per stereo channel)
Flexible compressor/expander function with peak t
limiter per stereo channel as well as additional stereo
imager and stereo delay for delay line applications
Unique VPQ (Virtual Paragraphic EQ) option allows t
parametric control of graphic EQs
Ultra-high resolution 61-band real-time t
FFT analyzer with additional auto EQ
function for room and loudspeaker equalization
Multi-functional level meters (peak/RMS, VU and SPL t
meter with dBA/dBC weighting via RTA/Mic input)
64 user memories for complete setups and/or t
individual module con gurations
Separate RTA mic/line input with phantom power, t
professional Wordclock input and MIDI connections for
full remote control, preset dumps and system updates
Ultra-high resolution 24-bit/96 kHz A/D- and D/A t
converters (113 dB dynamic range)
Open architecture allowing future software updates t
via MIDI
2 high-performance 32/40-bit oating-point DSPs for t
ultimate sonic resolution
DI Boxes
Professional, multi-purpose 8-channel direct t
injection box
Converts unbalanced line inputs into balanced outputst
Optional mains or phantom powered operationt
Ultra- at frequency response due to servo-t
balanced operation
Professional 4-channel active direct injection boxt
Converts unbalanced line inputs to balanced outputst
Extremely linear frequency response from 10 Hz to t
50 kHz
+20 dB gain switch for preampli cation of t
low- level signals
ULTRA-DI PRO DI800
ULTRA-DI PRO DI4000
Allows direct connection to speaker outputs with up to t
3,000-Watts
Ultra-low noise operational ampli ers for outstanding t
audio performance
+20 dB gain switch for pre-ampli cation of t
low- level signals
Attenuation switch for input levels up to +40 dBut
Switchable attenuation allows maximum input t
of +50 dB
S/N ratio –95 dB, THD <0.005%t
Phase reverse switch for instant correction of t
phase problems
BEHRINGER OT-1 output transformer for full t
galvanic insulation
Internal battery t
automatically shuts o
when phantom power is
connected
Direct connection t
of ampli er outputs
with ratings of up to
3,000 Watts
Professional Active t
2-Channel DI-Box/
Splitter
Converts 2 separate t
unbalanced ¼" TRS line
inputs into 2 balanced
XLR outputs
Ultra- exible: mono, t
2-channel or stereo
DI box operation with
switchable Link mode
ULTRA-DI DI100
ULTRA-DI DI20
Switchable input attenuation allows input levels of up t
to +50 dB
Ground lift switch eliminates typical ground t
loop problems
Rugged, road-proof aluminum caset
Stackable oversized rubber cornerst
BEHRINGER OT-1 output transformer for full t
galvanic insulation
Additional Split mode (channel 1 assigns the signal to t
both XLR outputs)
Phantom or 9 V battery poweredt
Switchable input attenuation allows connection to t
outputs with up to 3,000 Watts
Input 2 usable as channel 1 Link output (additional to t
XLR output)
Ground lift switch eliminates typical ground t
loop problems
Ultra-compact, road-suitable housingt
ULTRA-DI DI600P
ULTRA-DI DI400P
MICROHD HD400
Connect your guitar or bass directly to your mixer t
without losing tone due to impedance mismatches,
long cables and cycle hum
Converts any unbalanced line-level signal to balanced t
mic-level output
Provides impedance and signal matching for the direct t
connection of instruments to ampli ers and mixers
Connect your guitar or bass directly to your mixer t
without losing tone due to impedance mismatches,
long cables and cycle hum
Converts any unbalanced line-level signal to balanced t
mic-level output
Provides impedance and signal matching for the direct t
connection of instruments to ampli ers and mixers
Allows the use of long cables without losing t
high frequencies
Thru/Out jack lets you send the unbalanced signal to an t
onstage ampli er while the balanced signal is routed
to the mixer
Switchable input for connecting instruments or t
ampli ers with outputs up to 3,000 Watts
Filter switch reduces annoying hiss and buzzt
Ground lift switch eliminates typical ground loop t
problems such as hum
High-performance transformer for ultimate t
signal integrity
Ultra-compact, all-metal and road-suitable housingt
Allows the use of long cables without losing t
high frequencies
Thru/Out jack lets you send the unbalanced signal to an t
onstage ampli er while the balanced signal is routed
to the mixer
Ground lift switch eliminates typical ground loop t
problems such as hum
High-performance transformer for ultimate t
signal integrity
Ultra-compact, all-metal and road-suitable housingt
Removes AC hum and noise - fast, easy and reliablet
Breaks ground loops safely, while keeping highest t
sonic quality
Automatically converts unbalanced to balanced signals t
without any signal loss
Two ¼" TRS inputs and outputs for 2 mono or t
1 stereo signal
High-quality active t
direct injection box
with switchable 4 x 12"
speaker simulation
Switchable input t
attenuation for input
levels of up to +48 dBu
Ground lift switch t
eliminates typical ground loop problems
Internal battery automatically shuts o when phantom t
power is connected
Direct connection of amp outputs with ratings of up to t
3,000 Watts
Rugged, road-proof aluminum caset
Stackable oversized rubber cornerst
BEHRINGER OT-1 output transformer for full galvanic t
insulation and S/N ratio of over 100 dB
ULTRA-G GI100