Product information guide

24
37
Charging Tone
Press to display the main menu items.
Press to choose , then press .
Press or to choose , then
press .
Press or to choose " " to activate this
feature or choose " " to deactivate it, and then press
.
Menu
Select
Up Down Charging tone
Select
Up Down ON
OFF
Select
beneath
beneath
beneath
beneath
1
2
3
4
Every time you place the handset on the base, a tone occurs.
This tone confirms that the handset is charging. You can switch
the tone or .ON OFF
For normal use, we recommend that you leave the charging
tone enabled. This makes the phone easier to use and
avoids the risk In
this case
improper placement in the chargi
, the handset would not charge and it might go
unnoticed.
ng cradle.
Note:
Chapter 3: Basic Functions
Making a Call
When you dial, up to 25 digits appear on the screen. If the
number is longer than 16 digits, the digits become smaller to
accommodate the whole number.
You can place your calls in two ways:
Pick up the handset and press to engage the line. You
hear a dial tone, and appears.
Dial a telephone number. The number appears on the screen.
When you hear your called party, speak with a normal voice.
To end the call, press or place the handset on the base.
Enter a telephone number. Press and hold to insert a
pause if necessary. Check the number on the display.
If you make a mistake, correct it by using .
When the number correctly appears, press to dial it out
through a landline.
Or press to dial through your iPhone.
For more details please refer to
section.
Delete
Bluetooth
beneath
Note: The DECT phone must first be connected to the
iPhone via Bluetooth.
1
1
2
2
3
3
Traditional Mode
High-featured Mode
This procedure is more convenient and reliable,
:
because you
can check the number as you enter it
Sound