IL40 Portable Telephone Amplifier User’s Guide 1
Important Safety Instructions When using your portable phone amplifier, always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons, or property, including the following: 1. Read and understand all instructions, warnings and product markings. 2. Be aware there is a slight possibility of electrical shock from lightening. 3. Do not use this product near or in water or when you are wet.
Power Requirements Your IL40 is powered by a 9V battery (not included). Install a 9V battery in the battery compartment prior to operation. NOTE: Insert the battery with the (+) side going between the guard posts in the battery compartment. The (-) side (larger of the two connectors on the battery) must be Figure 2 on the top. Installing the battery improperly will cause damage to the unit and will void all warranties. Please make specific note to the installation of the battery.
Operation Volume Control You can adjust the volume level by using the Volume Control Slide located on the top of the unit (left control). Pushing the slide up increases the volume. Tone Control You can adjust the tone by using the Tone Control Switch located on the top of the unit (right control). The Tone Control shapes the sound by increasing the bass or the treble. The Tone Control Switch has five (5) positions. Adjust the Tone Control until you find a position that provides the clearest sound.
Troubleshooting If after installing your IL40 Amplifier, you do not have a dial tone or the person you called cannot hear you, take the following steps: 1. Check that all connections are plugged in properly 2. Make sure a new battery is installed. 3. Either disconnect the unit or use another phone and check that your phone service is working properly. 4. Change the compatibility setting dial located on the bottom of the unit.
Regulatory Compliance Part 68 of FCC Rules Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
trouble is experienced with this telephone equipment, for repair or warranty information, please contact ClearSounds Communication at 1-800-965-9043. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. DO NOT DISASSEMBLE THIS EQUIPMENT. This telephone equipment is not intended to be repaired and it contains no repairable parts.
Limited Warranty ClearSounds Communications warrants the IL40 Portable Telephone Amplifier against any defect in materials or workmanship for the period of one year from the date of purchase. Within a period of one year from purchase date, ClearSounds Communications will repair or replace (our discretion) your IL40 Portable Telephone Amplifier at no cost. If we elect to replace your amplifier, we may replace it with a new or reconditioned product of the same or similar de sign.