CL1 Loud N Clear Telephone Ring Signaler Users Guide
Important Safety Instructions When using your CL1 signaler, always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons, or property, including the following: 1. Read and understand all instructions, warnings and product markings. 2. Be aware there is a slight possibility of electrical shock from lightening. 3. Do not use this product near or in water or when you are wet.
Functions Alarm Mode Switch Volume Control FRONT Tone Contol Strobe Flasher BACK Loud Sound Alarm Wall Mounting Screw Holes Modular Line Telephone Jack Telephone Line Jack Bed Shaker Jack AC Adapter Jack
Installation AC Power Power Oulet Optional Bed Shaker 1. Plug the AC power adapter into the 12V DC Jack on the back of the CL1 and then into your wall outlet. 2. Plug one side of the phone cord (included) into the LINE IN jack on the back of the CL1 and the other side into your wall jack. 3. Plug your telephone into the LINE OUT jack on the back of the CL1. NOTE: The CL1 can operate independently without the telephone. Simply follow steps 1 & 2. 4.
Operation 1. Set the Alarm Mode. No Alarm Both Strobe Flasher & Sound Alarm Both Strobe Flasher & Shaker Both Sound Alarm & Shaker 2. Adjust your Volume Control This increases or decreases the volume of the Sound Alarm. 3. Adjust your Tone Control This shapes the sound by increasing the frequencies of the Sound Alarm.
Regulatory Compliance Part 68 of FCC Rules Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
please contact ClearSounds Communication at 1-800-965-9043. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. DO NOT DISASSEMBLE THIS EQUIPMENT. This telephone equipment is not intended to be repaired and it contains no repairable parts. Opening the equipment or any attempt to perform repairs will void the warranty. For service or repairs, call 1-800-965-9043.
Limited Warranty ClearSounds Communications warrants the CL1 Loud N Clear Phone Signaler against any defect in materials or workmanship for the period of one year from the date of purchase. Within a period of one year from purchase date, ClearSounds Communications will repair or replace (at our discretion) your CL1 Phone Signaler at no cost. If we elect to replace your signaler, we may replace it with a new or reconditioned product of the same or similar design.