Troubleshooting guide

15 – ENGLISH
QUATTRO
Phone
QUATTRO
Action:
Function
Condition
Start Point
Phone in Hands-Free Profile
Power ON
--
OFF
Press and Hold the MFB
until the QUATTRO is
powered ON. A set of 4 tones
plays (low to high) and the
LED flashes blue 4 times.
Pairing
--
OFF
Press and Extend Hold the
MFB for 6 seconds. The LED
will flash blue 4 times and
then alternately flash red
and blue. The QUATTRO can
then be discovered by
another Bluetooth device for
2 minutes.
Power OFF -- ON (idle) Press and Extend Hold the
MFB until the QUATTRO is
powered OFF. A set of 4
tones plays (high to low) and
the LED is off.
Make a Voice
Dial Call
ON ON (idle) Press and Release the MFB
twice quickly. Follow the
phone’s prompt and say the
desired name and the phone
will dial the number.
Redialing Last
Number
ON ON (idle) Press and Hold the MFB to
recall the last phone number
dialed (number dialed
automatically).
Receiving A Call ON (ring) ON (ring) Press and Release the MFB
to answer the call.
Ending A Call ON (on call) ON (on call) Press and Release the MFB
to end the call.
Rejecting a Call ON
(phone ring)
ON (ring) Press and Hold the MFB to
reject the call.
Put Call on Hold ON (on call) ON (on call) Press and Hold the MFB to
place the current call on
HOLD.
Resume a Call
On Hold
ON (active
call on Hold)
On (active
call on Hold)
Press and Hold the MFB to
retrieve the call.
Answering 2
nd
Incoming Call
ON (on call) ON (on call) Press and Hold the MFB to
put the 1
st
call on hold and
answer the 2
nd
call.
To Switch
Between 2
active calls
ON (on call) ON Press and Hold the MFB to
place the 2
nd
call on hold and
return to the first.
Transfer call
from Neckloop
to Phone
ON (on call) ON Press and Extend Hold the
MFB to turn the QUATTRO off
(4 tones high to low), and
the call is transferred to the
phone.
Transfer Call
from Phone to
Neckloop
ON (on call) OFF
(previously
paired)
Press and Hold the MFB.
Once a connection is
established, the call is
transferred to the QUATTRO.
User initiated
Reconnect
ON (idle) ON (not
connected)
Press and Release the MFB,
and the QUATTRO will try to
reconnect to the last
connected device.
Muting the
Microphone
ON (on call) ON (on call) Press and Hold
simultaneously the VOL +
and VOL – buttons to mute
the microphone. Press and
hold the VOL + and VOL –
buttons again to cancel the
muting.