User guide

Battery Engage Switches: There is a battery engage switch on both the removable
mic and the Base. This switch MUST be in the + position on both the Mic & Base for
the unit to function. By switching to the – position, the battery is disengaged from
the circuit. This switch does NOT need to be put in the – position. The purpose is
to protect the integrity of the battery when stored in the warehouse.
Charging Dimples: These holes are where the charging
pegs (see page 11) are placed when the mic is attached
to the base. The mic must be attached when charging
the unit in order for the mic batteries to charge.
Engagement + / -
13