User guide

16 – ENGLISH
17 – ENGLISH
CopyFromTheCallerIDToThePhonebook
YoucancopyCallerIDinformationtothephonebookwhileyouare
reviewingtheCallerIDinformation.
• SelecttherequiredCallerIDmemorylocationbypressing or .
• PressandholdMENU button for two seconds, display will show
COPY TO MEMORY.
• PressDIAL button, display will show SAVED!
TROUBLESHOOTINGGUIDE
No dial tone
1 Check that all phone cord connections (including the curly cord) and
ACAdapteraresecurelypluggedintothetelephone&walljack.
2 Check that the phone is in the correct dialing mode, Touch-Tone /
Pulse Setting.
3 Plug another phone into the jack to make sure your phone service
is functioning properly.
Call will not dial or dials very slowly
1 Check that the phone is in the correct dialing mode, Touch-Tone /
Pulse Setting
No audible ringer
1 Youmayhavetoomanyextensionsonyourline.Tryunplugging
a few devices. Having too many telephones /accessories can also
create problems such as low ringer volume or impaired quality
during calls.
No amplification
1 Check to see if the amplify button is “ON”. The red light should be lit.
2 Check the AC Power Adapter and make sure it is plugged into the
wall and into the appropriate jack on the phone.
Noise, Static, Interference while using the handset
1 AfiltermayberequiredforhomeswithDSLlineornearRadio
towers.
There is a red light that continues to flash
1 You have un-reviewed Caller ID / Call Waiting information or
missed a call.
CallerIDinformationdoesnotshow
1 MakesureyouaresubscribedtoCallerIDthroughyourlocalphone
company.
Talk500ER-Trilingual.indd 17 5/13/08 8:39:10 AM