ENGLISH ESPAÑOL FRANÇAIS CSC 600 V508 1 – ENGLISH
Congratulations on your purchase of the CSC600 Phone from ClearSounds Communications®. Please read this User Guide carefully in order to get the very best results from your telephone. Keep the manual near the telephone for easy reference. Please visit our web site at www.clearsounds.com to: Register your product, download additional manuals, and review trouble shooting tips.
WARNING: No telephone should ever be placed near an open radiator or heating register. WARNING: Occasionally a power surge can occur on electrical lines without warning. With any electrical device that you plug into an outlet, it is suggested you use a surge protector. A surge protector will prevent power surges from damaging your telephone. Surge protectors are simple devices available at your local hardware store. WARNING: Never push any objects through the slots in the phone.
PLEASE SAVE THESE INSTRUCTIONS ttt SPCH VOL HI LO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Hook switch Caller ID Screen Delete Button Up and Down Buttons Dial Button Phonebook Button Handset Tone control Handset Volume control Voice mail button Call waiting Programming button Emergency Memory Dial Amplify Button Headset Button Speaker Button Flashing incoming call indicator 17 Redial Button 18 M1-M5 One Touch Memory Dial buttons 19 Speakerphone 20 Speaker Volume Control 21 Ringer Volume 22 Outgoing sp
Installation of your ClearSounds® CSC600 Amplified Phone is easy. There are some basic steps you need to take when you set-up your CSC600 Phone for the first time. 1 Check parts list. a Handset with handset cord and phone base b Telephone line cord c User’s Manual d AC Power Adapter 2 Install (4) AAA Alkaline batteries (optional). This provides back-up power to the Caller ID Screen. 3 Phone mounting installations. 4 Set the dialing mode. 5 Choose desktop or wall mount. 6 Set ringer and auxiliary alert.
NOTE: Disposing of used batteries improperly may cause environmental damage. PHONE MOUNTING INSTALLATIONS The telephone may be placed on a shelf or table, or may be fixed to a wall using the mounting bracket. Plug the AC Adapter into the AC power back on the back of your phone, then into an electrical outlet or surge protector, if you are using one. NOTE: The adapter is required for the telephone to work correctly.
upper and lower key hole slots on the back of the phone. Slowly slide the phone down until it snaps into place. 6 Connect the handset coil cord (curly cord) to the handset and to the telephone. 7 Attach the AC Power Adapter to the back of the phone and plug the other end into a working electrical outlet (not controlled by a wall switch). 8 Lift the handset and listen for a dial tone. If you hear a dial tone, your phone is ready to use.
4 On completion of the call, press the SPEAKER button again. Receiving/Answering A Call Using The Speakerphone 1 Press the SPEAKER button while the phone is ringing to answer. 2 Adjust the volume to fit your need (Same as above). 3 On completion of the call, press the SPEAKER button again. Switch between Handset and Speakerphone While on a handset call, press the SPEAKER button and replace the handset in the cradle. While on a speakerphone call, lift the handset.
potentially result from misuse. Using the volume reset override In standard mode, the phone will reset to normal sound levels when you hang up. This allows people who do not require the level of amplification offered on the phone to use it. If you would like to override the reset, simply turn the AUTO AMPLIFY Oswitch on the back of the phone to “ON” using the tip of a pencil or paper clip IMPORTANT: When the AUTO AMPLIFY Oswitch is in the “ON” position, you do not need to press the “AMP” (amplify) button.
3 Using the keypad, dial the number you would like to save, including “1” and the area code (if applicable). 4 Press and hold down one of the Priority or Memory Dial buttons (M1 – M5) located on bottom of the phone for approximately 1-2 seconds. Each button can be programmed (or reprogrammed using the same procedure) for a phone number. 5 Hold the button until the screen displays <> 6 To register your stored phone numbers, use the phonebook insert card located under the base.
into the shaker jack and place it between your mattress and box spring. Caution: For safety and correct functionality considerations, your CSC600 Phone can only be guaranteed when used with our ClearSounds® Bed Shaker, model CS-SHK. The 3-position switch located on the back of the phone allows for the settings. FUNCTION OPERATION The main menu includes: PHONE BOOK, SET TIME, and SET PHONE.
To review the phone book number: Use the or button to review the call by pressing sequence of the number +# or the CALLER ID button with the phone in the on-hook position. NOTE: IF you want to review the seventh entry just press the matching number and the name will display on the LCD. To delete a single phone book number Use the or button to select the phone book number which you want to delete, press the DELETE button once and the LCD shows DEL?. Press the DELETE button once more to confirm.
SETTING UP THE PHONE This menu include 9 submenus: SET RING, CALL WAITING, AUTO ON HOOK, SET LANGUAGE, LCD CONTRAST, SET FLASH, DIM:X-x, HOUR AND DATE FORMAT. or arrow buttons to scroll through the menu to select Using the the feature you wish to program. Using the or arrow buttons select the feature and press the DIAL button to select the feature. Press the DELETE button to exit the menu.
CALLER ID SYSTEM OPERATION Subscription to Caller ID service from your local phone company is required. New Calls/Messages waiting indicator The red indicator light will flash to indicate that you have new calls/ messages have been reviewed. Review Your Caller ID Records Use the or arrow button to scroll through the Caller ID list. At the end of the caller ID record list, you will see the “END OF LIST” or button to continue. message on the LCD.
CALLER ID ON CALL WAITING When you subscribe to Caller ID/Call Waiting service from your local telephone company and you activate the call waiting function, the telephone will display the name and number of the second caller while you are having a conversation. When you are on the line, the telephone will display the name and number of the second caller. Press the CALL WAITING button to answer the second caller.
Total and New Calls This display shows you the total and new calls to be reviewed. In this example, you have 15 calls in total which includes 5 new calls 505"- /&8 Private If the caller has exercised the option to prevent their name and number from being sent “PRIVATE” will be shown on the screen. No Calls When all calls have been deleted.
TROUBLESHOOTING If you have problems with your CSC600, please check below for helpful hints. No dial tone 1 Check that all phone cord connections (including the curly cord) and AC Adapter are securely plugged into the telephone & wall jack. 2 Check that the phone is in the correct dialing mode, Touch-Tone / Pulse Setting. 3 Plug another phone into the jack to make sure your phone service is functioning properly.
Audible/Visual indicator, the light will contine to flash after reviewing your voice mail messages. Difficulty storing numbers in memory 1 Make sure you are pressing the correct sequence of buttons for storing numbers. 2 If you are interrupted by the telephone company’s recorded announcement telling you to hang up or by a loud buzzing noise, ignore and continue to store the numbers.
FCC REGISTRATION INFORMATION Your new product has been registered with the Federal Communication Commission (FCC). This product complies with standards in Part 68 of the FCC Rules. The FCC requires us to provide you with the following information: Connection and Use with the Nationwide Telephone Network The FCC requires that you connect your product to the nationwide telephone network through a modular telephone outlet or jack.
Rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If your product causes interference to radio or television reception when it is in use, you might correct the interference with any one or all of these measures: (a) where it can be done safely, reorient the receiving television or radio antenna.
LIMITED ONE-YEAR WARRANTY The product is warranted by ClearSounds against manufacturing defect in material and workmanship under normal use for one (1) year from the date of purchase. Should you experience a problem, contact our customer service department or visit our website at www.clearsounds.com. Be sure to save your sales receipt as proof of purchase date should you need warranty service.
Shipping cost must be prepaid and the product must be packaged appropriately for shipping. IMPORTANT: YOUR RECEIPT IS PART OF YOUR WARRANTY AND MUST BE RETAINED AND PRODUCED IN THE EVENT OF A WARRANTY CLAIM. Service in United States ClearSounds Communications Service in CANADA ClearSounds Canada Attention: Repair Center 8160 S Madison Street Burr Ridge, IL 60527 USA 800-965-9043 Attention: Repair Center 220 Donaghy Ave North Vancouver, BC CANADA V7P 2L5 800-965-9043 Check our website www.Clearsounds.
