COMMUNICATIONS™ Loud N’ Clear™ Telephone Ring Signaler CL1 User’s Guide CS-CL1manual.
Important Safety Instructions When using your CL1 signaler, always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons, or property, including the following: 1.Read and understand all instructions, warnings and product markings. 2. Be aware there is a slight possibility of electrical shock from lightening. 3.Do not use this product near or in water or when you are wet.
Functions CS-CL1manual.
Installation 1.Plug the AC power adapter into the 12V DC Jack on the back of the CL1 and then into your wall outlet. 2.Plug one side of the phone cord (included) into the LINE IN jack on the back of the CL1 and the other side into your wall jack. 3.Plug your telephone into the LINE OUT jack on the back of the CL1. NOTE: The CL1 can operate independently without the telephone. Simply follow steps 1 & 2. 4.
Operation 1. Set the Alarm Mode. No Alarm Both Strobe Flasher & Sound Alarm Both Strobe Flasher & Shaker Both Sound Alarm & Shaker 2. Adjust your Volume Control This increases or decreases the volume of the Sound Alarm. 3. Adjust your Tone Control This shapes the sound by increasing the frequencies of the Sound Alarm. CS-CL1manual.
Regulatory Compliance Part 68 of FCC Rules Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this telephone equipment, for repair or warranty information, please contact ClearSounds Communication at 1-800-965-9043.
Limited Warranty ClearSounds Communications warrants the CL1 Loud N’ Clear Phone Signaler against any defect in materials or workmanship for the period of one year from the date of purchase. Within a period of one year from purchase date, ClearSounds Communications will repair or replace (at our discretion) your CL1 Phone Signaler at no cost. If we elect to replace your signaler, we may replace it with a new or reconditioned product of the same or similar design.
