User Manual

7
4 Menu
4.1 HDAVS Series DVR Settings
Note
The following operation and interfaces for reference only. Please refer to the HDAVS
series DVR user’s manual for detailed information.
After connected the camera to the HDAVS series DVR, from Main Menu->Setting->System-
>PTZ, you need to set control mode as HDAVS and the protocol as DH-SD1. Click Save
button to save current setup. See Figure 4-1.
Figure 4-1
On the preview interface, right click mouse and then select PTZ; you can see an interface
shown as below. See Figure 4-2.
Figure 4-2
Click Iris “+” to open menu or confirm current operation.