User Manual

1
1 General Introduction
1.1 Overview
This series megapixel HD camera conforms to the HDAVS standard. It supports video signal
high-speed long distance transmission without any delay. It can be controlled by the DVR
conforming to the HDAVS.
1.2 Features
 High-performance CMOS image sensor, megapixel definition.
 Default motorized vari-focal lens, adopt auto focus technology, support coaxial cable to
control lens zoom and focus.
 Support HD video and control signal coaxial transmission.
 Support 75-3 coaxial cable transmission without any loss. 720P series transmission
distance over 500m, 1080P series transmission distance over 300m.
 High speed, long distance real-time transmission.
 Support HDAVS HD and analog SD switch output.
 720P series support 720P@25, 720P@30, 720P@50, 720P@60.
 1080P series support 1080P@25, 1080P@30, 720P@25, 720P@30, 720P@50,
720P@60.
 Support high performance 3D noise reduction (denoise), excellent performance in low
illumination
 Support ICR switch to realize surveillance both in the daytime and at night.
 Support OSD (on-screen display), suitable for user self-defined setup.
 Support DC12V power supplying.
 IP66, IK10 compliance.
 Support intelligent IR function, max IR distance 30m.
1.3 Functions
HDAVS Specification
HDAVS is an over-coaxial –cable HD video transmission standard. The technology renders
two HD video formats by progressive scanning.
Auto Focus Technology
Detect the location of main screen by the camera auto focus algorithm, and auto adjust focus
motor according to the current focus situation, which would realize zoom control the entire auto
focus. The image stays clear during the process of zooming.
OSD
User-friendly on-screen display for you to select the different functions.
ICR
The IR cut removal is to filter the IR light in the daytime and then auto switch to the general
fitter at night. This function allows the camera to output the high sensitivity and clear video.