User Manual Chapter 3

Chapter 3 - 13
5. DNS server configuration. The DNS server program that runs at the ISP side resolves domain names to IP
addresses. To be connected to Internet, the PC has to know the IP address of this server in order to request IP
resolution. Most ISP’s have a primary and a secondary DNS server.
a.) For Windows 95® or 98®: (see Figure 3-12)
1.) Select the DNS Configuration tab.
2.) Check the Enable DNS button.
3.) Enter the DNS server IP address.
4.) Click the Add button.
5.) Repeat steps 3) and 4) for each additional DNS server IP address.
b.) For Windows NT®:(see Figure 3-13)
1) Select the DNS tab.
2) Press the Add button. When prompted, enter the DNS IP address.
3) Repeat step 2) for each additional DNS server IP address.
Figure 3-12 Windows 9x
Figure 3-13 Windows NT