Specifications

Electric Tool Control TME-100 Series
en02d141.fm, 30.01.2001 PL12-1300 12/00 15
Cleco
Tool
Pin # Description Value
1 +Excitation +12 V +/- .05 V
2 -Excitation 0 V
3 Drehmomentsignal 0 to +5 V
4 0 V Drehmomentsignal 0 V
5 Tool Memory TXD - -3 V to +3 V
6 Tool Memory TXD + -3 V to +3 V
7 Tool Memory RXD - -3 V to +3 V
8 Tool Memory RXD + -3 V to +3 V
9 Resolver Carrier R1 7 VAC
10 Resolver Carrier R2 0 VAC
11 Resolver Cosine S1 7 VAC
12 Red LED 0 to +24 V
13 Signal GND 0 V
14 Yellow LED 0 to +24 V
15 Motor PE 0 V
16 Start Switch 0 to +24 V
17 Reverse Switch 0 to +24 V
18 +24V +24 V
19 Motor Phase C 0 to 300 V
20 Transducer Calibration 0 to +5 V
21 Temperature Sensor + 0 to +5 V
22 Temperature Sensor - 0 to +5 V
23 Motor Phase B 0 to 300 V
24 Resolver Sine + S2 7 VAC
25 Resolver Cosine S3 0 VAC
26 Resolver Sine S4 0 VAC
27 Motor Phase A 0 to 300 V
28 Green LED 0 to +24 V
Housing PE 0 V
Serial
Pin # Description Value
1 DCD -25 V to +25 V
2 RxD -25 V to +25 V
3 TxD -25 V to +25 V
4 DTR -25 V to +25 V
5GND0 V
6 DSR -25 V to +25 V
7 RTS -25 V to +25 V