Cleer Wifi Speaker Cleer Inc. Cleer WiFi Speaker User Guide powered by Amazon Alexa 2018 Sept 21st Revision 1.
Cleer Wifi Speaker Versions 1.0 Cleer Inc.
Cleer Wifi Speaker Cleer Inc. Table of Content Summary .......................................................................................................................... 4 LED Behavior .................................................................................................................... 4 Power on operation.......................................................................................................... 6 WI-FI Setup ...........................................................
Cleer Wifi Speaker Cleer Inc. Summary Cleer WiFi has three connection modes, Wi-Fi mode, Bluetooth mode and line-in. LED Behavior There are two groups of LEDs, Bluetooth LED at the bottom and mic interaction LEDs on top. Bluetooth LED Bluetooth LED is for the indication of three connection status, Bluetooth connected with white LED solid on, Bluetooth disconnected with LED off and Bluetooth connecting with white LED flash.
Cleer Wifi Speaker Cleer Inc. Pic 2. Recovery lighting 3. IDLE mode：Refer to Amazon 4. LISTEN trigger mode：Refer to Amazon 5. THINKING mode：Refer to Amazon 6. SPEAKING mode：Refer to Amazon 7. FADE mode：Refer to Amazon 8. SYSERR mode：12 LEDs in yellow solid on 9. WIFIOFF mode：12 LEDs in yellow solid on 10. MICOFF mode：Refer to Amazon 11. ALARM mode：Refer to Amazon 12.
Cleer Wifi Speaker Cleer Inc. Twelve LEDs in purple breathe once. 15. NOTIFICATION mode： refer to Amazon 16. TIMER mode：refer to Amazon 17. REMINDER mode：refer to Amazon `Power on elaboration After power-on, the LEDs on the top in cyan go out, refer to pic 1. When the system is initialized, the LED will go out and the device will start to enter the interaction mode.
Cleer Wifi Speaker Cleer Inc. 2-1. Firstly, it prompts to long tap the MODE button for about 5s to enter setup mode, then click Start to next interface. 2-2.
Cleer Wifi Speaker Cleer Inc. 2-3. If user wants to change the Wi-Fi, click “Select other network”，then “AGREE” to change the Wi-Fi selection. 2-4.
Cleer Wifi Speaker Cleer Inc. 2-5. If there are several devices found for setup, there will be a selection page for user to choose. 2-6. Once you choose the device in the list, this device will response with a voice prompt. If it is right one the user wants to set up, click “NEXT” for next step.
Cleer Wifi Speaker Cleer Inc. 2-7. If the device is set up successfully, it will go to the interface where user can select a name for the device among the list or create a name, then click “Done”. 3. With setup done successfully, it will go back to the home page and the setup device will be shown here.
Cleer Wifi Speaker Cleer Inc. 4. For the device online, user can drag the volume button on the interface to adjust the volume or user can click the item to enter the detail page, where user can delete the online device. 5.
Cleer Wifi Speaker Cleer Inc. 5-1. click item 1, user can enter Alexa set up page 5-2. Item 2, user can select the sound mode.
Cleer Wifi Speaker Cleer Inc. 5-3. Item 3, to trigger or mute mic 5-4.
Cleer Wifi Speaker Cleer Inc. 5-5. Item 5, rename the device. 5-6.
Cleer Wifi Speaker Cleer Inc. 5-7. Item 7, agree or disagree to delete the device. 6. when the device is offline, it will pop up the offline dialog box, click "Continue" to go back to the home page.
Cleer Wifi Speaker Cleer Inc. OTA upgrading elaboration In the detail page of the app, user can check the firmware version, and if it is the latest version, it will be shown at the Firmware column; If there is an new version, there will be a prompt in red to show the firmware info.
Cleer Wifi Speaker Cleer Inc. When there is an up-to-date firmware version, click the Firmware column and then “AGREE” to upgrade the device. After upgrading complete, it will go to the home page with the prompt of the upgrading.
Cleer Wifi Speaker Cleer Inc. After OTA complete, it will have the info as below. Audio mode operation elaboration Touch panel There are five function buttons on the Touch panel.
Cleer Wifi Speaker Volume button: “ Cleer Inc. ”&“ ” for volume adjustment, long tap or short tap, with LED indication. Mute button: “ ”, for muting and initiating mic array; when muted, the mute button will be indicated in red lighting and the LED array will also be in red; when initiated, the LEDs are off. Mode switch button: “ ”, short tap for audio modes switch; long tap for NETSET setup mode, with LED indication. Play/pause button: “ ” for music play or pause.
Cleer SPACE Cleer Inc. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
