Instruction manual

20
21
WARNING — DEATH or
SERIOUS INJURY can occur
• To prevent ejection in a crash, the loops at the end of the Shoulder
Harness Straps must be properly attached to the Metal Harness Plate.
• To prevent loose Harness and risk of ejection in a crash, Harness must be
properly routed under bottom of seat back cover.
• To prevent loose Harness and risk of ejection in a crash, the Shoulder
Harness Straps must be routed through Shoulder Harness Slots at the
same height on each side and in the pad and seat back.
Shoulder Harness Adjustment
Figure 18
Figure 17
Figure 19
SHOULDER HARNESS SLOT SELECTION
Place child in seat and select the appropriate
set of Shoulder Harness Slots for the direction
child is facing.
For Rear-Facing Use: Choose the Shoulder
Harness Slots at or just below and closest
to the shoulders of your child as shown in
Figure 17.
For Forward-Facing Use: Choose the
Shoulder Harness Slots at or just above
and closest to the shoulders of your child as
shown in Figure 18.
SHOULDER HARNESS UNTHREADING
Step 1
Loosen Harness to largest size:
• While lifting up on Harness Adjuster
Tab, pull out on Shoulder Harness Straps
until they stop as shown in Figure 19.