Specifications

PREPARATION

WaterSupply:

A Ensurethereisanadequatewatersupplyeitherfromthemainsorareservoir.

B Attachwatersupplyhosestosuitabletaporimmersethesuctionhosewithapprovedsuc‐
tionfilterintothereservoir.

 NOTE:ONLYCLEANWATERSHOULDBEUSED.THEPUMPMAYBEDAMAGEDIFDIRTYOR
CONTAMINATEDWATERISALLOWEDTOPASSTHROUGHTHEPUMP.

Hoses:Lowpressureinlet.

Formodelsupto13litresperminuteuse½“boresuctionhoseorfeedpipe.
Formodelsfrom13litresto24litresperminuteuse¾”boresuctionhoseorfeedpipe.

Hoses:Highpressureoutlet.

Forallmodelsuse3/8”RITor3/8”R2Thoses.

A Checktheconditionofthe“O”ringsintheendsofthehose.

B Attachthehighpressurehosetothepumpconnection.

C Attachthesprayguntooppositeendsofthehighpressurehose.

OPERATION

A Turnonthewatersupply.

B Starttheengine

C Directlanceontosurfacetobecleaned.Pressthelancetrigger.