Installation Instructions

99
13 Installing head shower
1
Measure the distances to the centerlines of the
hole.
Draw the hole on the tile and drill a hole.
Place the tile in the wall.
50 mm
50 mm
The PVC tube of the head shower is adjustable. Align the front with the front of the tile. This can be done
by loosening and tightening the screws (A). Measure the tile thickness to come out well.
50 mm
50 mm
3
4
2
A A
Turn the brass ring on the shower rod and turn it on the shower holder. Make sure that the bend is pointed
down! Mark the holes with a pencil.
All distances serve as an example