Installation Instructions

105
13 Installing head shower
1
Measure the distances to the centerlines
of the hole.
Draw the hole on the tile and drill a
hole. Place the tile in the wall.
50 mm
50 mm
The PVC tube of the head shower is adjustable. Align the front with the front of the tile.
This can be done by loosening and tightening the screws (A). Measure the tile
thickness to come out well.
50 mm
50 mm
3
4
2
A A
Turn the brass ring on the shower rod and turn it on the shower holder.
Make sure that the bend is pointed down!
Mark the holes with a pencil.
All distances serve as an example