Operating Instructions and Installation Instructions


Deutsch
A
Elektrischer Anschluss ≤ 3,2 kW
Whirlpool an Stromversorgung 230V/50Hz (2)
mit einem 3-adrigen Kabel anschließen. Der
Anschluss erfolgt im Verteilerkasten (1).
Potentialausgleichkabel 4mm
2
(3) an
Lüsterklemme (4) anschließen.
(2): elektrische Zuleitung 230V/50Hz
(3): Potentialausgleichkabel 4mm
2
(5): elektrischer Anschluss zur Basissteuerung
(vormontiert)
B
Elektrischer Anschluss > 3,2 kW
Whirlpool an Stromversorgung 230V/50Hz (2)
mit einem 4-adrigen Kabel anschließen. Der
Anschluss erfolgt im Verteilerkasten (1).
Potentialausgleichkabel 4mm
2
(3) an
Lüsterklemme (4) anschließen.
(2): elektrische Zuleitung 230V/50Hz
(3): Potentialausgleichkabel 4mm
2
(5): elektrischer Anschluss zur Basissteuerung
(vormontiert)
(6): elektrischer Anschluss zur Zusatzsteuerung
(vormontiert)
C
Anschlussbelegung der Steuerung
X1: Gebläse
X2: Anschluss 230V/50Hz
X3: Hydropumpe
X4: ohne Belegung
X5: Halogenlampe
X9: Ladestation Poolmaster
X10: Wassersensor unteres Niveau
X10: ohne Belegung
X11: Wassersensor oberes Niveau
X14: Verbindungskabel Zusatzsteuerung
X6: Magnetventil Zone 1
X7: Magnetventil Zone 2
X8: ohne Belegung
D
Anschlussbelegung Zusatzsteuerung
X15: Heizung
X16: Anschluss 230V/50Hz
X3: ohne Belegung
X18: ohne Belegung
X19: ohne Belegung
X20: Magnetventile für Superwhirl
X21: ohne Belegung
X22 : Farblicht
X28: Verbindungskabel Basissteuerung
STROMVERSORGUNG/ ANSCHLUSSBELEGUNG
English
POWER SUPPLY/ PIN ASSIGNMENT
A
Electrical connection ≤ 3.2 kW
Connect the whirlpool to the power
supply 230V/50Hz (2) with a three-wire cable.
The connection is made in the distributing
box (1).
b) Connect the earthing cable 4mm
2
(3) to the
terminal strip (4).
(2): Electrical supply lines 230V/50Hz
(3): Earthing cable 4mm2
(5): Electrical connection to basic control
(pre-fitted)
B
Electrical connection > 3.2 kW
a) Connect the whirlpool to the power
supply 230V/50Hz (2) with a four-wire cable.
The connection is made in the distributing
box (1).
b) Connect the earthing cable 4mm2(3) to the
terminal strip (4).
(2): Electrical supply lines 230V/50Hz
(3): Earthing cable 4mm2
(5): Electrical connection to basic control
(pre-fitted)
(6): Electrical connection to additional control
(pre-fitted)
C
Pin assignment of control
X1: Blower
X2: 230V/50Hz connection
X3: Water pump
X4: Not used
X5: Halogen lamp
X9: Poolmaster charging station
X10: Bottom level water sensor
X10: Not used
X11: Top level water sensor
X14: Additional control
X6: Solenoid valve zone 1
X7: Solenoid valve zone 2
X8: Not used
D
Anschlussbelegung Zusatzsteuerung
X15: Heating
X16: 230V/50Hz connection
X3: Not used
X18: Not used
X19: Not used
X20: Solenoid valve for Superwhirl
X21: Not used
X22: Colour light
X28: Basic control
Nederlands
A
elektrische aansluiting ≤ 3 kW
Whirlpool aan de stroomtoevoer 230V/50Hz
(2) middels een 3-aderige kabel aansluiten.
De aansluiting geschiedt in de verdeelkast
(1).
Aardingskabel (3) met BC 4 mm2 aan het
aansluitblokje (4) monteren.
(3): aardingskabel (BC 4 mm
2
)
(2): elektrische stroomtoevoer 230V/50Hz
(5): elektrische aansluiting van de besturing
(voorgemonteerd)
B
Elektrische aansluiting > 3 kW
Aardingskabel (3) met BC 4 mm
2
aan het
aansluitblokje (4) monteren.
Whirlpool aan de stroomtoevoer 2x 230V/50Hz
(2) middels een 4-aderige kabel aansluiten. De
aansluiting geschiedt in de verdeelkast (1).
(3): aardingskabel (BC 4 mm
2
)
(2): elektrische stroomtoevoer 230V/50Hz
(5): elektrische aansluiting voor de
besturing (voorgemonteerd)
(6): elektrische aansluiting voor additionele
schakelkast (voorgemonteerd)
C
Aansluitblok van het basisstation
X1: Blower
X2: Aansluiting 230V/50Hz
X3: Hydropomp
X4: Zonder aansluiting
X5: Verlichting
X9: Laadstation Poolmaster
X10: Onderste watersensor
X10: Zonder aansluiting
X11: Bovenste watersensor
X14: Additioneel station
X6: Magneetventiel Zone 1
X7: Magneetventiel Zone 2
X8: Zonder aansluiting
D
aansluitblok additioneel station
X15: Verwarming
X16: Aansluiting 220V/50Hz
X3: Zonder aansluiting
X18: Zonder aansluiting
X19: Zonder aansluiting
X20: Magneetventiel voor Superwhirl
X21: Zonder aansluiting
X22 : Kleurenlicht
X28: Basisstation
STROOMVOORZIENING/ AANSLUITCODERING