User's Manual

Cleveland Medical Devices Inc. RatPaak™ User’s Guide

BioRadio Data Files

To open a BioRadio Data file, select Open from the File menu. Under the Files of Type drop-down box in

the Open window, select "BioRadio Data File (*.bd)" to show the available BioRadio Data files.

Select the file you wish to open and click the Open button. The data will be displayed as a normal Crystal

Data file. To save changes to a BioRadio Data File, see “Converting BioRadio Data Files” on page 31.

Changing the Display

Viewing saved data is similar to viewing the data in Capture Mode. All of the display features and

commands can be customized in the same way. Refer to Chapter 3, ‘Recording Physiological Data’ or

Chapter 5, ‘RatPaak Command Reference’.

Searching through Data

When reviewing saved data, you can use the scroll bar that appears at the bottom of the Display Graph to

browse through the file. This scroll bar represents the entire length of the data file, and the scroll bar button

represents the current view position of the data file.

You can click and drag on the scroll bar thumb to quickly move within the recorded data file and search for

particular epochs of data. Clicking on the button to the left of the thumb causes you to move backwards

through the file slowly. The buttons to the right of the thumb, in order from left to right, replicate the

behavior of the navigation controls on the Main Toolbar.

Navigation Controls

Jump to Beginning: moves the display to the beginning of the data file.

Page Backward: moves the display back one page (page size dictated by the Timescale setting.)

Page Forward: moves the display forward one page (page size dictated by the Timescale setting.)

Jump to End: moves the display to the end of the data file.

CleveMed Proprietary

Information