Instruction Manual

ManualsBrandsCleveland Motion Controls ManualsHardwareBrake EMAG 150

Nominal torque 200 Nm ft.lb 150

Minimal torque 2 Nm ft.lb 1.5

Coil resistance - 20°C Ohms 12

Rated current DC A 1.55

Rotor inertia 35.2.10-3 kg.m2 lb.ft 2 818.10-3

Weight 24 kg lb 52.9

Heat dissipation

W *

Continuously sustained

400

0 0,5 1 1,5 2

100

150

200

250

Specifications

56 99

Ø 230 h8

Ø 278

10 E9

Ø 38 H8

41,3 J13

* Heat dissipation is the mechanical power (P = cw) maximum allowable.

Application Notes

•Lubricated for life (other internal lubrication not required).

The shaft should be lubricated upon assembly, to prevent seizing.

•For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2)

•The standard device is designed for horizontal shaft orientation,

and a minimal speed of 60 RPM. Maximum speed is 3000 RPM

(without exceeding the max. heat dissipation capability).

•For Engineering application, please contact our technical support.

•In normal use, the outside temperature of the device can increase up to 100°C,

without damage.

Torque Nm

Current A

2 terminals

6 holes ﬂ 8,5 at 60¡ on ﬂ 263

Cleveland-Kidder®

ELECTROMAGNETIC

PARTICLE BRAKE

EMAG 150

• Easy Electric Remote Control

• Low Power Consumption

• High Level of Torque Stability

• Highest Torque Density

• No Dust

• Noiseless

• Easy Installation

• Maintenance-Free Bearing

Summary of content (2 pages)

PAGE 1
Cleveland-Kidder® ELECTROMAGNETIC PARTICLE BRAKE EMAG 150 Specifications Nominal torque Minimal torque Coil resistance - 20°C Rated current DC Rotor inertia Weight Heat dissipation Continuously sustained 200 2 35.2.10-3 24 Nm Nm kg.m2 kg ft.lb 150 ft.lb 1.5 Ohms 12 A 1.55 lb.ft 2 818.10-3 lb 52.9 W* 400 * Heat dissipation is the mechanical power (P = cw) maximum allowable.
PAGE 2
Cleveland-Kidder® Specifications Nominal torque 200 Minimal torque 2 Coil resistance - 20°C Rated current DC Rotor inertia 35.2.10-3 Weight 30 Heat dissipation Continuously sustained with heat sink – H Continuously sustained with heat sink and blower – HB Nm Nm ft.lb ft.lb Ohms A lb.ft 2 lb W* 750 kg.m2 kg 150 1.5 12 1.55 818.10-3 66.