User Manual

Nominal torque 65 N m ft.lb 50
Minimal torque 0.63 N m ft.lb 0.45
Coil resistance - 20°C Ohms 20
Rated current DC A 1
Rotor inertia 2.10-3 kg.m2 lb.ft 2 46 10-3
Weight 11 kg lb 24.2
Heat dissipation W *
Continuously sustained with heat sink – H 250
Continuously sustained with heat sink and blower – HB 1300
0 0,2 0,4 0,6 0,8 1
0
10
20
30
40
50
60
70
Specifications
60
2,5
Ø 75 h8
Ø 157,25
Ø 278
22,8 J13
6 E9
Ø 20 H7
60
± 0,1
* Heat dissipation is the mechanical power (P = cw) maximum allowable.
Application Notes
•Lubricated for life (other internal lubrication not required).
The shaft should be lubricated upon assembly, to prevent seizing.
•For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2)
•The standard device is designed for horizontal shaft orientation,
and a minimal speed of 60 RPM. Maximum speed is 3000 RPM
(without exceeding the max. heat dissipation capability).
•For Engineering application, please contact our technical support.
•In normal use, the outside temperature of the device can increase up to 100°C,
without damage.
Max. deepness 15
6 holes M6 at 60° on Ø 144
Torque Nm
Current A
2 terminals
Cleveland-Kidder®
ELECTROMAGNETIC
PARTICLE BRAKE
EMAG 50H
EMAG 50HB
• Easy Electric Remote Control
• Low Power Consumption
• High Level of Torque Stability
• Highest Torque Density
• No Dust
• Noiseless
• Easy Installation
• Maintenance-Free Bearing
7550 Hub Parkway
Cleveland, OH 44125-5794
Tel: [phone] or (800)-321-8072
Fax: [phone]
www.CMCcontrols.com
INDUSTRIAL PRODUCTS
© 2003 Cleveland Motion Controls. All Rights Reserved. Litho USA 10/03 3M EMAG50-DS