Owner's manual
Nominal torque 120 Nm ft.lb 90
Minimal torque 1.2 Nm ft.lb 0.9
Coil resistance - 20°C Ohms 12.5
Rated current DC A 1.1
Rotor inertia 26.5.10-3 kg.m2 lb.ft 2 615.10-3
Weight 17 kg lb 37.5
Heat dissipation
W *
Continuously sustained
275
0 0,3 0,6 0,9 1,2
0
20
40
60
80
100
120
140
Specifications
72
66
56
Ø 252,5
Ø 214 h7
10 D10
31,3
Ø 28 H7
+ 0,3
- 0
* Heat dissipation is the mechanical power (P = cw) maximum allowable.
Application Notes
•Lubricated for life (other internal lubrication not required).
The shaft should be lubricated upon assembly, to prevent seizing.
•For use with Cleveland-Kidder® 2 Amp, 24 VDC power suppy (Model EMAG-PS2)
•The standard device is designed for horizontal shaft orientation,
and a minimal speed of 60 RPM. Maximum speed is 3000 RPM
(without exceeding the max. heat dissipation capability).
•For Engineering application, please contact our technical support.
•In normal use, the outside temperature of the device can increase up to 100°C,
without damage.
8 holes Ø 8,2 at 45° on Ø 233
2 terminals
Torque Nm
Current A
Cleveland-Kidder®
ELECTROMAGNETIC
PARTICLE BRAKE
EMAG 90
• Easy Electric Remote Control
• Low Power Consumption
• High Level of Torque Stability
• Highest Torque Density
• No Dust
• Noiseless
• Easy Installation
• Maintenance-Free Bearing