User guide
AO-70173 13 Revision BA
WebPro Unwind Brake Tension Controller
Press 4 Enter the Commissioning password 5678 ( factory default ) and then press ENTER
Commissioning Menu
1. Machine parameters *
2. Calibrate tension *
3. Calibrate speed *
4. Adjust PI stability *
5. Change passwords *
6. Diagnostics *
An asterisk * indicates that a further menu will open if this item is selected.
Machine Parameters
From the Commissioning Menu; press 1 to show the Machine Parameters screen
Machine Parameters (SET UP = cancel)
changed
by using
default
value
Language English Deutsch Français Italiano Español
Unit system S.I. / Metric kgf / Pound/foot / Percent
Controller application Unwind
Unwind type * Brake / Speed / Torque
Output range 0-10V / 0-20mA / 4-20mA / 0-50mA
Start in control screen No / Yes
Enable MAN/AUTO/OFF keys No / Yes
Dual tension range No / Yes
Full scale (low) Enter a value
Full scale (normal) Enter a value
Minimum tension 3% minimum, 20% maximum
Static friction Torque mode only, 10% maximum
Dynamic friction Torque mode only, 20% maximum
Output level bias 20% maximum
Output level limit 100% maximum
Diameter adjustment 50% minimum, 200% maximum
Set point ramp rate 1% per second, 100% per second
Soft stop time 10 seconds maximum
Display damping time 0.1 seconds, 3 seconds
Display precision 0.1, 0.5, 1, 5, 10
Digital inputs
MACHINE START Disabled, 0V=OFF, 0V=ON
SELECT AUTO Disabled, 0V=OFF, 0V=ON
SELECT MANUAL Disabled, 0V=OFF, 0V=ON
SELECT OFF Disabled, 0V=OFF, 0V=ON
DIAMETER HOLD Disabled, 0V=OFF, 0V=ON
DIAMETER RESET Disabled, 0V=OFF, 0V=ON
BATCH HOLD Disabled, 0V=OFF, 0V=ON
ENABLE EXT SP Disabled, 0V=OFF, 0V=ON
Show internal calibration * No / Yes
Right transducer Disabled, Enabled
Line tacho or encoder * Disabled, Tacho, Encoder
Winder tacho or encoder * Disabled, Tacho, Encoder
+/-
+/-
+/-
+/-
+/-
+/-
+/-
numeric key
numeric key
numeric key
numeric key
numeric key
numeric key
numeric key
numeric key
numeric key
numeric key
numeric key
+/-
+/-
+/-
+/-
+/-
+/-
+/-
+/-
+/-
+/-
+/-
+/-
+/-
English
S.I.
Brake
0-10V
No
No
No
5000
5000
6%
0%
0%
0%
100%
100%
5%/sec
6 secs
2 secs
1
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
No
Disabled
Disabled
Disabled
An asterisk * indicates that a further menu will open if this item is selected.










