Owner`s manual

Descaling Procedure for SteamCraft

Ultra 5 and Ultra 10

Cleveland Range recommends DISSOLVE® Descaler Solution, Part No. 106174 or 1061741

Use no other system of steamer descaling

Appropriate warnings and safe handling procedures must be provided to handlers and users

Instructions and warnings on Dissolve® containers and Material Safety Data Sheets supercede

and replace instructions and warnings in this manual

General precautions: wear rubber gloves, splash goggles and other protective clothing and

equipment as necessary. Refer to Dissolve® container labels and Material Safety Data Sheets for

information regarding eyewash, first aid, medical treatment, and spill control.

b. Descaling Procedure

1) Turn steamer OFF and open door(s)

• 3 minute Automatic Blowdown cycle runs

2) Turn steamer ON

• Generator begins to refill

DANGER

The liquid solution in Cleveland Range Descaler Solution Part No. 106174 or 1061741

can be harmful if not handled properly. Follow these basic safety rules for handling and

using this product. Instructions and warnings on container labels supercede all other

warnings and instructions.

Wear protective clothing when mixing or applying chemical cleaners

Wear rubber gloves, and OSHA approved eye protection when descaling

Avoid breathing fumes

If liquid contacts skin: wash with soap and water and seek medical attention.

If chemical contacts eyes: flush with water and seek medical attention

If chemical is swallowed or ingested: drink 1 or 2 glasses of water and seek medical

attention

WARNING

Descaling procedure is slightly different depending on model. This

entire procedure should be read and fully understood as it applies to

the model being descaled, before beginning descaling operations.