System information

MTS0601
Type S Column Line Array Mounting Accessories
SREP4 Extension plate - indoor use for Type S Line Array
SRFB4 Flying bracket - indoor use for Type S Line Array
SRWB4 Wall mount bracket - indoor use for Type S Line Array
SREP4WP Extension plate - outdoor use for Type S Line Array
SRWB4WP Wall mount bracket - outdoor use for Type S Line Array
SRTB4 Wall tilt bracket - indoor use for Type S Line Array
SRTB4WP Wall tilt bracket - outdoor use for Type S Line Array
SRSA4 Stand adaptor - indoor use for Type S Line Array
SRFS4 Floor stand - indoor use for Type S Line Array
SRRP4 Protection pad for Type S Line Array
MTS0601 60 watt 100 volt Line matching transformer
Enclosure Impedance
Power
Handling
Sens
(1W/1M)
Frequency
Response
Dispersion
Angle
Drivers
(low/
high)
Dimensions
(mm)
IP
Rating
Weight
(kg)
SRS4L Bass Reflex 8 ohm 600 W (cont
program)
94 dB 70 Hz - 20 kHz 90 deg.
Horiz. 0 deg.
Vert.
8 x 100
mm/24
x Dome
Tweeter
160 (W) × 895
(H) × 255 (D
- 16
SRS4S Bass Reflex 8 ohm 600 W (cont
program)
93 dB 70 Hz - 20 kHz 90 deg.
Horiz. 10 deg.
Vert.
8 x 100
mm/24
x Dome
Tweeter
160 (W) × 892
(H) × 303 (D)
- 16
SRS4LWP Sealed 8 ohm 600 W (cont
program)
94 dB 70 Hz - 20 kHz 90 deg.
Horiz. 0 deg.
Vert.
8 x 100
mm/24
x Dome
Tweeter
160 (W) × 895
(H) × 255 (D
IPX4 16
SRS4SWP Sealed 8 ohm 600 W (cont
program)
93 dB 70 Hz - 20 kHz 90 deg.
Horiz. 10 deg.
Vert.
8 x 100
mm/24
x Dome
Tweeter
160 (W) × 892
(H) × 303 (D)
!PX4 16
106
Speakers
Speakers
Column/Array
TOA Type S Column Line Arrays
• Two-way bass reflex column line array available as either straight
or curved design
• Each unit contains 32 speaker elements (eight bass/mid drivers
and 24 dome tweeters)
• Multiple units can be joined for larger venues
• Also available in sealed weather resistant version
• Mounting options include wall mount, pan/tilt, flying and pole
mount options
• FB120 (B/W) sub-woofer can be used if required.
• Free EASE Focus aiming software is also available
www.toa.com.au