System information
Table Of Contents
- cat cover front med res
- Installed Sound Catalogue-low-res.pdf
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Power Amplifiers - Two Channel Low Impedance
- Peavey PV series amplifiers
- Featuring Peavey’s DDT™ distortion detection technique (which virtually eliminates distortion caused by over-driving the amplifier), the PV series is rugged, value-priced family of hardworking analogue amplifiers. The PV series also features Peavey’s pat
- Peavey CS amplifiers
- Power Amplifiers - Two Channel Low Impedance
- Amplifiers
- Amplifiers
- Amplifiers
- Power Amplifiers - Four Channel Low Impedance
- Power Amplifiers - Four Channel High Impedance
- Amplifiers
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- AKG Wireless Microphone Management System
- AKG HUB 4000Q
- The HUB 4000 Q enables you to connect up to eight AKG devices to any Harman Professional HiQnet system. It is a true plug and play device, so all you need to do to install the HUB 4000 Q is connect it to your computer via a commercial CAT-5 network cable.
- AKG System Architect
- The Harman System Architect™ PC software will automatically identify all HUB 4000 Qs connected to the computer. The channel-oriented user interface in System Architect provides intuitive monitoring of all wireless channels. 1 Click Setup makes frequency m
- AKG Wireless iPhone App
- The AKG Wireless iPhone App enables you to monitor and control a complete AKG wireless system from your iPhone or iPod touch via Wi-Fi™. The AKG Wireless iPhone App is the fastest and easiest way to check the wireless connection between a transmitter and
- AKG Wireless Microphone Management System
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- AKG Headphones
- AKG Headphones
- AKG Headsets
- Record and Replay
- Record and Replay
- Record and Replay
- Record and Replay
- Record and Replay
- Mixers
- Mixers
- Mixers
- Mixers
- Mixers
- Signal Processing
- Signal Processing
- Signal Processing
- DSP Systems
- DSP Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Portable PA
- Portable PA
- Portable PA
- Portable PA
- Conference Systems
- Conference Systems
- Conference Systems
- Conference Systems
- Conference Systems
- Conference Systems
- Network Systems
- Network Systems
- IP Intercom - TOA N8000 IP Intercom
- TOA N8000DI Direct Select I/O Unit
- TOA N8000CO Central Office Unit
- TOA N8000AL Telephone Interface Unit
- TOA N8000RS Two Wire Sub-Station Interface
- TOA N8010RS Two Wire Sub-Station Interface
- TOA N8400RS Four Wire Sub-Station Interface
- TOA N8500MS/N8510MS IP Master Station
- TOA N8000MS/N8010MS Master Station
- TOA N8011MS Master Station
- IP Intercom - TOA N8000 IP Intercom
- Network Systems
- Network Systems
- Cables
- Cables
- Cables
- Cables
- Test Equipment
Channels
Input
Type
Output
power
8 Ohms
(Watts)
Output
power
4 Ohms
(Watts)
Bridged
output
8 Ohms
(Watts)
Signal-
Noise Ratio
(20Hz-
20kHz
@ rated
power)
Frequency
Response
Dimensions Weight
Power
Consumption
MCA8050 8
Balanced 20k Ohms
Phoenix terminal
30 50 100 >85dB
20Hz - 20kHz
(+0/-1dB)
2RU (Hxwxd)
89 x 483 x
394
13.6 kg 900 W max
MCA8150 8
Balanced 20k Ohms
Phoenix terminal
90 150 300 >85dB
20Hz - 20kHz
(+0/-1dB)
3RU (Hxwxd)
133 x 483 x
394
15.9 kg 1800 W max
Options
MCA8050
TDT50 - 50 watt 100V output transformer (per channel)
TDT100 - Bridged 100 watt 100V output transformer (per bridged pair)
MCA8150
TDT150 -1 50 watt 100V output transformer (per channel)
TDT300 - Bridged 300 watt 100V output transformer (per bridged pair)
14
Power Amplifiers
Amplifiers
Power Amplifiers - Eight Channel High/Low Impedance
Biamp MCA Series
Biamp Systems’ MCA Series amplifiers offer 8 channels of amplification
within one chassis. All models in the MCA series include contractor
friendly features that allow for total flexibility in system design. Add
to this Biamp Systems’ now legendary bulletproof reliability and the
MCA series becomes the perfect fit for your next project. All backed
by a 5 year warranty.
Features include:
• 8 channels of amplification in one convenient chassis
• Optional transformers for 25/70/100 Volt systems
• Rear panel level controls
• High-pass filter switches per channel (120Hz -12dB/Octave)
• Dual-color signal/peak indicators on front & rear panels
• Front panel indicators for amplifier temp/load faults
• Terminals for remote control of channel levels and muting
Extensive protection:
• Front panel indicators for amplifier temp/load faults
• Self re-setting protection against short-circuit, improper load,
and over-temperature conditions.
• Fan cooled design
www.biamp.com.au