System information
Table Of Contents
- cat cover front med res
- Installed Sound Catalogue-low-res.pdf
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Power Amplifiers - Two Channel Low Impedance
- Peavey PV series amplifiers
- Featuring Peavey’s DDT™ distortion detection technique (which virtually eliminates distortion caused by over-driving the amplifier), the PV series is rugged, value-priced family of hardworking analogue amplifiers. The PV series also features Peavey’s pat
- Peavey CS amplifiers
- Power Amplifiers - Two Channel Low Impedance
- Amplifiers
- Amplifiers
- Amplifiers
- Power Amplifiers - Four Channel Low Impedance
- Power Amplifiers - Four Channel High Impedance
- Amplifiers
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- AKG Wireless Microphone Management System
- AKG HUB 4000Q
- The HUB 4000 Q enables you to connect up to eight AKG devices to any Harman Professional HiQnet system. It is a true plug and play device, so all you need to do to install the HUB 4000 Q is connect it to your computer via a commercial CAT-5 network cable.
- AKG System Architect
- The Harman System Architect™ PC software will automatically identify all HUB 4000 Qs connected to the computer. The channel-oriented user interface in System Architect provides intuitive monitoring of all wireless channels. 1 Click Setup makes frequency m
- AKG Wireless iPhone App
- The AKG Wireless iPhone App enables you to monitor and control a complete AKG wireless system from your iPhone or iPod touch via Wi-Fi™. The AKG Wireless iPhone App is the fastest and easiest way to check the wireless connection between a transmitter and
- AKG Wireless Microphone Management System
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- AKG Headphones
- AKG Headphones
- AKG Headsets
- Record and Replay
- Record and Replay
- Record and Replay
- Record and Replay
- Record and Replay
- Mixers
- Mixers
- Mixers
- Mixers
- Mixers
- Signal Processing
- Signal Processing
- Signal Processing
- DSP Systems
- DSP Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Portable PA
- Portable PA
- Portable PA
- Portable PA
- Conference Systems
- Conference Systems
- Conference Systems
- Conference Systems
- Conference Systems
- Conference Systems
- Network Systems
- Network Systems
- IP Intercom - TOA N8000 IP Intercom
- TOA N8000DI Direct Select I/O Unit
- TOA N8000CO Central Office Unit
- TOA N8000AL Telephone Interface Unit
- TOA N8000RS Two Wire Sub-Station Interface
- TOA N8010RS Two Wire Sub-Station Interface
- TOA N8400RS Four Wire Sub-Station Interface
- TOA N8500MS/N8510MS IP Master Station
- TOA N8000MS/N8010MS Master Station
- TOA N8011MS Master Station
- IP Intercom - TOA N8000 IP Intercom
- Network Systems
- Network Systems
- Cables
- Cables
- Cables
- Cables
- Test Equipment
Inputs Outputs Termination Control Dimensions Weight
Power
consumption
301 MIXER
3 x Balanced Mic/ line
Stack input from other
mixers
1 x Balanced Line Barrier Strip Remote VCA
(W x H x D): 483 x
44 x 178mm
2.72Kg <15 Watts
601 MIXER
6 x Balanced Mic/ line
Stack input from other
mixers
1 x Balanced Line Barrier Strip Remote VCA
(W x H x D): 483 x
44 x 178mm
2.72Kg <15 Watts
801 MIXER
8 x Balanced Mic/ line 1 x
Aux input + Stack input
1 x Balanced Line
unbalanced direct
out per input
Barrier Strip Remote VCA
(W x H x D): 483 x
44 x 178mm
2.72Kg <15 Watts
57
Mixers
Visit: www.audioproducts.com.au or Free Call: 1300 134 400
Mixers
Strip Mixers
Biamp 301 and 601 Mixer
The 301 & 601 are single rack space, three input and six input mic/
line mixers. Each input channel uses a differentially balanced, discrete
transistor mic/line preamplifier for low noise and low distortion
performance. Special features, including limiters and remote level
control, make the 301 and 601 extremely versatile. 301 and 601
mixers are dependable, easy to install, simple to operate, and are
covered by Biamp Systems’ five-year warranty
• Three electronic balanced mic/line input channels (301)
• Six electronic balanced mic/line input channels (601)
• Each input has rotary level control with peak LED indicator,
screwdriver trim adjust with 30dB pad switch and +24V phantom
power
• VOX auto-muting of one channel for “talk-over” applications
• Remote VCA Master level control with signal present LED
• Main patch insert point for external processing along with main
stacking input for signals from other mixers
• Screwdriver-adjust tone controls and limiter on main output
Biamp 801 Mixer
The 801i is a single rack-space mixer, with eight mic/line inputs
and one auxiliary line input. It utilises the same balanced mic/line
preamplifier as the 301 and 601 mixers. Special features, including a
limiter and remote level control, make the 801i extremely versatile.
each input has rotary level control with peak LED indicator,
screwdriver trim adjust with 30dB pad switch, +24V phantom power
and High pass filter switch.
• Aux input switch selectable for balanced or stereo summing
• Aux input ‘VOX auto-ducking’ switch selectable on channels 1~8
• Unbalanced direct output terminal on each input channel
• Remote VCA Master level control with signal present LED
• Main output includes limiter and Bass and Treble control with
rear panel bypass switch
• Channel 1 automatic override assignable on other channels
• Stack in and slave switch for adding inputs by linking units
www.biamp.com.au