System information

62
Signal Processing
Signal Processing
Speaker processors
Peavey VSX26
• 2 input/6 output loudspeaker DSP management system
• 48 kHz sample rate, 24-bit 256x over-sampled Delta-Sigma AD, DA
• USB A port for load/save of storage parameters from USB key
• XLR inputs and outputs, AES-EBU digital input
• +24dBu inputs and outputs
• uilt-in signal generator (white, pink, sine)
• fully adjustable crossover points
• easy-to-read LCD screen
• features per input:
• 27-band Graphic EQ
• Autograph
®
algorithm for automatic EQ settings
• compressor/limiter
• delay (340 ms)
• features per output:
• drossover/bandpass filter (Butterworth, Bessel, Linkwitz-Riley)
• parametric EQ (5-band, HP, LP Notch, Horn EQ, All-Pass),
• compressor/limiter,
• delay with polarity inversion
• 5 year warranty
Tannoy TDX1 DIGITAL SYSTEM CONTROLLER
Versatile, powerful and feature packed digital system controller, with
crossover, EQ, delay and limiting functions and pre-programmed optimisation
of the performance of Tannoy loudspeaker systems.
• Two input, 4 output on balanced XLR plus a digital input at 44.1 or 48kHz
• Signals present on inputs A & B can be routed to any of the four
output channels
• Variable high and low pass filters for each output can be set with a
choice of classic filters
• Four band parametric EQ on each input and output for
speaker management
• Independent delay on all outputs (up to 200ms per channel)
• Four high performance limiters
• Presets pre-loaded with all common combinations of Tannoy products
plus 100 ‘user presets’
Tannoy SC1VNET DIGITAL SYSTEM CONTROLLER
Tannoy’s powerful 2-in 6-out digital system controller, the VNET SC1
combines the functions of multiple conventional processing products into
1RU of rack space. Using DSP-based digital crossovers with 96kHz sampling
rates this versatile, feature packed unit will enable simple configuration and
optimisation of loudspeakers for superior audio quality.
• Two balanced XLR analogue inputs and six balanced XLR analogue outputs
• Simple configuration and optimisation of loudspeakers in terms of
speaker management and room EQ functionality
• Intuitive signal flow based interface and 2 x 24 character backlit LCD
• Unique routing engine allows any input to be sent to any output
• Butterworth, Bessel, Linkwitz Riley and Hardman type filters are available
on all outputs
• Input and output gain is adjustable in 0.2dB steps from - 40dB to +15dB
• Input delay adjustable in variable steps from 0 to 400ms, while
output delay is adjustable to 80ms
• RS232 connector enables connection to a PC for enhanced control
functions using VNET™ software