System information
Table Of Contents
- cat cover front med res
- Installed Sound Catalogue-low-res.pdf
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Power Amplifiers - Two Channel Low Impedance
- Peavey PV series amplifiers
- Featuring Peavey’s DDT™ distortion detection technique (which virtually eliminates distortion caused by over-driving the amplifier), the PV series is rugged, value-priced family of hardworking analogue amplifiers. The PV series also features Peavey’s pat
- Peavey CS amplifiers
- Power Amplifiers - Two Channel Low Impedance
- Amplifiers
- Amplifiers
- Amplifiers
- Power Amplifiers - Four Channel Low Impedance
- Power Amplifiers - Four Channel High Impedance
- Amplifiers
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- AKG Wireless Microphone Management System
- AKG HUB 4000Q
- The HUB 4000 Q enables you to connect up to eight AKG devices to any Harman Professional HiQnet system. It is a true plug and play device, so all you need to do to install the HUB 4000 Q is connect it to your computer via a commercial CAT-5 network cable.
- AKG System Architect
- The Harman System Architect™ PC software will automatically identify all HUB 4000 Qs connected to the computer. The channel-oriented user interface in System Architect provides intuitive monitoring of all wireless channels. 1 Click Setup makes frequency m
- AKG Wireless iPhone App
- The AKG Wireless iPhone App enables you to monitor and control a complete AKG wireless system from your iPhone or iPod touch via Wi-Fi™. The AKG Wireless iPhone App is the fastest and easiest way to check the wireless connection between a transmitter and
- AKG Wireless Microphone Management System
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- AKG Headphones
- AKG Headphones
- AKG Headsets
- Record and Replay
- Record and Replay
- Record and Replay
- Record and Replay
- Record and Replay
- Mixers
- Mixers
- Mixers
- Mixers
- Mixers
- Signal Processing
- Signal Processing
- Signal Processing
- DSP Systems
- DSP Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Portable PA
- Portable PA
- Portable PA
- Portable PA
- Conference Systems
- Conference Systems
- Conference Systems
- Conference Systems
- Conference Systems
- Conference Systems
- Network Systems
- Network Systems
- IP Intercom - TOA N8000 IP Intercom
- TOA N8000DI Direct Select I/O Unit
- TOA N8000CO Central Office Unit
- TOA N8000AL Telephone Interface Unit
- TOA N8000RS Two Wire Sub-Station Interface
- TOA N8010RS Two Wire Sub-Station Interface
- TOA N8400RS Four Wire Sub-Station Interface
- TOA N8500MS/N8510MS IP Master Station
- TOA N8000MS/N8010MS Master Station
- TOA N8011MS Master Station
- IP Intercom - TOA N8000 IP Intercom
- Network Systems
- Network Systems
- Cables
- Cables
- Cables
- Cables
- Test Equipment
69
Networked Media Systems
Networked Media Systems
Tesira Expanders
EX-MOD
The Tesira EX-MOD is a modular expander device that is designed for use with Tesira SERVER
and SEVER-IO devices. It can be configured with up to three 4-channel input and/or output
cards for a maximum of 12 channels. The EX-MOD expander communicates with the Tesira AVB
network for audio networking, configuration and control.
• Tesira Modular I/O expander device that can accommodate up to 3 I/O cards, providing up
to 12 channels of analog audio
• AVB connection to Tesira system for audio networking, configuration and control
• Plug-in barrier strip connections on cards
• Internal universal power supply
• Rack mountable (1RU)
EX-MOD Expander Cards
EIC4 – 4 channel Mic/Line input card
• 4 channels of balanced mic or line level input on plug-in barrier strip connectors
• Clip indicator and +48V Phantom Power per input
EOC4 – 4 Channel Line output card
• 4 channels of balanced line level output on plug-in barrier strip connectors
• Selectable full-scale output reference level (24dBu, 18dBu, 12dBu, 6dBu, 0dBu, -31dBu)
for best interface/performance
EIOC4 – 2 Channel Mic/line input and 2 channel Line output card
• 2 channels of balanced mic or line level inputs with +48V Phantom Power on each input
• 2 channels of balanced line level output
• Plug-in barrier strip connectors
Tesira Ethernet Controls
Tesira surface-mounted and in-wall remote Ethernet control devices offer a simple, intuitive
interface and can be installed and configured to fit the needs of a particular application.
The devices connect via standard CAT-5/6/7 cabling and are powered over Ethernet (PoE),
eliminating the need for custom cabling and local power sources. Multiple remote control
panels can be connected over large distances using standard network technology.
Available in 2 versions:
TEC1s – Surface Mount Control
TEC1i – In-wall Control
• Adjustment and/or initiation of 32 selectable system volumes and actions
• Control functions are programmed in the Tesira system design software
• High contrast OLED display with capacitive touch technology eliminates protruding
and moving parts to increase reliability and longevity
www.biamp.com.au