System information
Table Of Contents
- cat cover front med res
- Installed Sound Catalogue-low-res.pdf
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Amplifiers
- Power Amplifiers - Two Channel Low Impedance
- Peavey PV series amplifiers
- Featuring Peavey’s DDT™ distortion detection technique (which virtually eliminates distortion caused by over-driving the amplifier), the PV series is rugged, value-priced family of hardworking analogue amplifiers. The PV series also features Peavey’s pat
- Peavey CS amplifiers
- Power Amplifiers - Two Channel Low Impedance
- Amplifiers
- Amplifiers
- Amplifiers
- Power Amplifiers - Four Channel Low Impedance
- Power Amplifiers - Four Channel High Impedance
- Amplifiers
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- AKG Wireless Microphone Management System
- AKG HUB 4000Q
- The HUB 4000 Q enables you to connect up to eight AKG devices to any Harman Professional HiQnet system. It is a true plug and play device, so all you need to do to install the HUB 4000 Q is connect it to your computer via a commercial CAT-5 network cable.
- AKG System Architect
- The Harman System Architect™ PC software will automatically identify all HUB 4000 Qs connected to the computer. The channel-oriented user interface in System Architect provides intuitive monitoring of all wireless channels. 1 Click Setup makes frequency m
- AKG Wireless iPhone App
- The AKG Wireless iPhone App enables you to monitor and control a complete AKG wireless system from your iPhone or iPod touch via Wi-Fi™. The AKG Wireless iPhone App is the fastest and easiest way to check the wireless connection between a transmitter and
- AKG Wireless Microphone Management System
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- Microphones
- AKG Headphones
- AKG Headphones
- AKG Headsets
- Record and Replay
- Record and Replay
- Record and Replay
- Record and Replay
- Record and Replay
- Mixers
- Mixers
- Mixers
- Mixers
- Mixers
- Signal Processing
- Signal Processing
- Signal Processing
- DSP Systems
- DSP Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Networked Media Systems
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Speakers
- Portable PA
- Portable PA
- Portable PA
- Portable PA
- Conference Systems
- Conference Systems
- Conference Systems
- Conference Systems
- Conference Systems
- Conference Systems
- Network Systems
- Network Systems
- IP Intercom - TOA N8000 IP Intercom
- TOA N8000DI Direct Select I/O Unit
- TOA N8000CO Central Office Unit
- TOA N8000AL Telephone Interface Unit
- TOA N8000RS Two Wire Sub-Station Interface
- TOA N8010RS Two Wire Sub-Station Interface
- TOA N8400RS Four Wire Sub-Station Interface
- TOA N8500MS/N8510MS IP Master Station
- TOA N8000MS/N8010MS Master Station
- TOA N8011MS Master Station
- IP Intercom - TOA N8000 IP Intercom
- Network Systems
- Network Systems
- Cables
- Cables
- Cables
- Cables
- Test Equipment
Inputs Outputs Connectivity Control Dimensions Weight
Power
consumption
AUDIA8x8 SOLO 8 x Balanced Mic/Line 8 x Balanced Mic/Line Ethernet, RS-232 RC-Bus
(W x H x D): 483 x
45 x 283mm
3.9Kg 110 Watts
AUDIA12x4 SOLO 12 x Balanced Mic/Line 4 x Balanced Mic/Line Ethernet, RS-232 RC-Bus
(W x H x D): 483 x
45 x 283mm
3.9Kg 110 Watts
AUDIA4x12 SOLO 4 x Balanced Mic/Line 12 x Balanced Mic/Line Ethernet, RS-232 RC-Bus
(W x H x D): 483 x
45 x 283mm
3.9Kg 110 Watts
Inputs/outputs
Expansion/Audio
Distribution
Connectivity Control Dimensions Weight
Power
consumption
AUDIAFLEXNC 12 x card slots Provide up to 24
channels of I/O
- Ethernet, RS-232 RC-Bus (W x H x D): 483 x
89 x 283mm
6.2Kg <110 Watts
AUDIAFLEX 12 x Balanced Mic/Line Cobranet Enabled (with
redundancy) up to 64
channels over ethernet
network
Ethernet, RS-232 RC-Bus (W x H x D): 483 x
89 x 283mm
6.2Kg 110 Watts
71
Networked Media Systems
Networked Media Systems
Audia Processors
Biamp’s revolutionary Audia
®
Digital Audio Platform seamlessly integrates powerful hardware and intelligent software for unheard of design
and networking potential. In fact, Biamp is one of the first manufacturers to make use of CobraNet
®
by integrating it into our Audia DSPs,
pioneering its use in high profile installations. A single Audia unit can provide the power of an entire rack of processors at your fingertips.
Imagine what you can do with multiple Audia units, configured and networked to conquer the most challenging environments.
5 Year Warranty
AudiaSolo processors
For systems where no digital audio networking is required, AudiaSOLO is a, streamlined solution. It has all of Audia’s processing power and
a range of I/O options (8x8, 4x12, & 12x4). Only now we’ve engineered it into a single rack space unit with a new, low profile power supply.
The full Audia library of Algorithms is available. Supports daVinci software and all RCB remote devices. 5 Year Warranty
• Cost-effective single rack-space package
• Third-party control via RS-232
• Built-in diagnostic tools
• Remote function control via Ethernet
• Multi-level security coding
• Extensive processing library available
• Compatible with daVinci, Biamp’s control surface design package.
AudiaFlex
AudiaFLEX gives you unprecedented control of your system with the ultimate flexibility in design. Choose any configuration of input and
output pairs to create the system you need without compromises. Multi-Channel audio can be seamlessly distributed among multiple units
via CobraNet
®
, using economical Cat-5 cable. Control the processing power of the entire network over Ethernet, or via Crestron
®
, AMX
®
,
or other popular controllers. Each AudiaFLEX can provide up to 24 channels of I/O, or expand your options even further with the EXP and
MiniEXP range of CobraNet expansion units.
Couple with this Audia’s unprecedented software and processing library and you have a tool that is capable of even the most demanding
of system designs.
• Up to 24 inputs/outputs, any combination by pairs, with or without CobraNet
• Control via:
PC/laptop
Remote control panels for level, presets, etc.
Third-party control via RS-232
Built-in diagnostic tools
Remote function control via Ethernet
www.biamp.com.au