System information

Table Of Contents
72
Networked Media Systems
Networked Media Systems
AudiaFLEX input/output card options
AEC-2HD
Dual-Channel Wideband Acoustic Echo Cancellation Input Cards
Two mic/line level input channels with dedicated wideband processing on each input
Includes Biamp’s proprietary SONA
TM
Adaptive AEC Algorithm delivering true 20Hz to
20kHz wideband Echo Cancellation
On-board DSP, does not consume AudiaFLEX resources
IP-2
Dual-Channel Mic/Line Input Cards
Each card provides two mic/line input channels
Balanced inputs on plug-in barrier strip connectors
OP-2e
Dual-Channel Mic/Line Output Cards
Each card provides two mic/line output channels
Balanced outs on plug-in barrier strip connectors
PA-2
Dual-Channel Power Amplifier Cards
Directly powers 4, 6, or 8 ohm speakers
Software configurable from 5 to 30 watts dual-channel and from 10 to 60 watts
mono-bridged (limited to 120W load per Audiaflex chassis)
TI -2
Dual-Channel Telephone Interface Cards
Initiate outgoing calls including: DTMF tone dialing, speed-dialing, redial, flash
Detect and answer incoming calls
Line-echo cancellation and continuous line-status and fault monitoring
VoIP-2
Dual-Channel Voice Over Internet Protocol Cards
Two channels of VoIP interface per card
Caller ID, SIP Protocol, auto-answer, speed dial, hold capability, and direct dialing on each line
Up to six VoIP -2 Cards can be installed into a single AudiaFLEX unit
www.biamp.com.au